Electronics Forum | Fri May 24 17:28:04 EDT 2002 | fastek
Good points regarding Sanyo. I believe they were the first to introduce the "Direct Drive" concept. It's quite impressive. Panasonic probably ripped them off when designed their MSR's. It's interesting to note that an FCM-2 placing 96,000 comp. per h
Electronics Forum | Wed Nov 16 06:02:23 EST 2005 | stefwitt
Are feeders included? Otherwise, the MS 102/132 sell even for lower prices here in US. Add shipping and training and you get to the same result. Juki, Contact and Quad may fall in the same price range, but spare parts and service tech availability wi
Electronics Forum | Thu Jun 02 14:57:36 EDT 2011 | davef
We don't expect properly soldered first-side DPAKs to fall from the board during second-side reflow. The ratio of weight to solder surface area for a DPAK is 1.32 gm per in^2, which is well within the limit of 44 gm per in^2. [Search the fine SMTnet
Electronics Forum | Fri Mar 06 07:15:38 EST 2015 | saoasasd
Hi, I have faced some problems with DQFN PACKAGE 132 PIN. After some cross sections and dye pry analysis we could find a head on pillow situation always on inner row pads. The PCBAs are double side and the DQFNs are assembled on Bottom side (Noteboo
Electronics Forum | Thu Mar 25 23:23:00 EDT 2021 | llawrence
The QFP pitch is 0.5mm. Pad size is 1.475 x 0.3mm, and the new aperture size is 1.32 x 0.22mm. I'm not sure about whether or not it is lasered, but on the newly ordered stencil I selected the polishing option. Looks like the pad width is already 2/3
Electronics Forum | Fri Jul 30 17:22:48 EDT 1999 | Dave F
| | Surface Mount Components like QFP's in Tray usually comes sealed in an anti-static plastic pack. In case the QFP's were removed from the said anti-static bag for more than 2 weeks, do these components needed to be baked for they might produce so
Electronics Forum | Thu Jul 23 15:19:52 EDT 1998 | Timm
| | I am considering of Philips FCM for the next production. | | But I have heard a rumour saying this machine is not capable for checking the lead polarity due to the laser scan system. | | i.e. SOT might be populated in wrong direction. | | Can som
Electronics Forum | Fri May 24 11:46:34 EDT 2002 | tmv
Lot's of good discussion in this string...but I think we've missed a few points. First off...turret machines are more than capable of handling the smaller component sizes (in fact, they are the best)...Machines like the SANYO TCM-3000 or Universal 47
Electronics Forum | Wed Jun 23 10:05:17 EDT 2004 | exmaintenanceleader
Hi Grant, I'm ex Fuji service engineer I install also at Sagem Czecz Republik (Kladnow near Prague) in 2000 they use at new lines MPM- 2XCP643E and 1xUniversal GSM (French owen (I do not remember the exacly tipe) at second hand line they use 2x and
Electronics Forum | Fri Jul 24 12:53:30 EDT 1998 | Brad Kendall
| | | I am considering of Philips FCM for the next production. | | | But I have heard a rumour saying this machine is not capable for checking the lead polarity due to the laser scan system. | | | i.e. SOT might be populated in wrong direction. | | |