Electronics Forum | Fri Apr 01 14:51:23 EDT 2011 | jaimebc
We are currently experiencing a high rate of false calls on our 0402 chips. Resistors for the most part. Has anybody out there found a setting where this false calls are minimized? We are using top red light, pattern inspection,color inspection ( wh
Electronics Forum | Fri Apr 01 18:32:51 EDT 2011 | frcdave
Dback, Some questions for you: 1. Are you using the red light configuration for better contrast on the 0402 parts? 2. Is your system fitted with both low and High Magnification cameras? Have you spoken with the guys at YESTech? Their phone support i
Electronics Forum | Mon Apr 04 11:27:07 EDT 2011 | fishingfool
Dback, Most likely shouldn't have color inspection on. Using red light colors will look the same so you gain nothing by using this. What exactly are you getting as false calls? Sounds like you have lots of things going on in this type of inspect
Electronics Forum | Sat Nov 10 18:56:23 EST 2018 | cpcompany
Hi, Aval Let me introduce myself. I am Casey Park from Starworks Korea and providing used SMD equipment especially Samsung pick and placer and Mirtec AOI. Plus I provide refurbishment on old Samsung pick and placer. I have CP45FVNeo manual in PDF
Electronics Forum | Tue Jan 29 20:33:52 EST 2019 | deanm
First, you cannot measure capacitors once they are soldered onto the board. Second, why must you measure? Verify your machine set up by using intelligent feeders (if your machine has them) or a checklist, preferably by two people. If you cannot trus
Electronics Forum | Fri Feb 09 16:10:26 EST 2018 | wnb_peman
Hello everyone, We're a CM that utilizes both the Zenith AOI and 8030 SPI platforms. High mix, relative low volume so we're told by KY that our library is very large comparative to their other clients. Of all the SMT equipment we own, the KY softw
Electronics Forum | Wed Apr 04 13:33:12 EDT 2012 | rway
We currently have 2 M1 systems. Our false call rate has never been has high as you suggest. There is something wrong with your program and/or inspection algorithms, as you probably already know. You should be somewhere between 1000-1500 vcpmo (fal
Electronics Forum | Mon Feb 18 09:46:42 EST 2019 | cdav1100
We currently run a Yes Tech BX machine using the Yes Vision software on Windows 7. With Windows 7 support running out in January next year, I was curious if anyone had managed to run the Yes Vision software under Windows 10. The obvious answer is to
Electronics Forum | Tue Apr 09 16:25:28 EDT 2002 | clarkk
Alan, You're right, mass inspection after assembly won't work. The inspectors will miss 25% (or more) of the defects, and the boards will be reworked before SMT operators can properly define defects and their sources. The company I work for tends to
Electronics Forum | Fri Apr 02 10:26:13 EDT 2010 | fishingfool
Manjunath The top camera will be used for probably 90-95% of your inspection needs. However, without side cameras that 5-10% of uninspected parts can be a real pain to manually verify. What you need to figure out is what is your product to inspe