Electronics Forum | Sat Feb 04 09:36:51 EST 2012 | davef
You bet. Using a high temperature solder is a perfectly reasonable way the attach thermocouples. Just remember that the solder will not flow on the thermocouple. You need to use a solder iron to lay the solder over thermocouple to hold it in place.
Electronics Forum | Mon Jan 28 16:05:27 EST 2013 | jdengler
It's been a long time since I did this. I think if you get a cable (maybe from some of the used equipment dealers that advertise here) you will still need to change the contacts of the relay the Fuji uses. I think they use a normally closed set of
Electronics Forum | Tue Dec 02 18:29:23 EST 2014 | jorge_quijano
Hola, here is a question that may be answered by common sense, but I'd like to hear from you; I have a couple of SMT lines, and I'm constantly changing from leaded to lead-free process and backwards, so, I cannot dedicate one line for leaded and ano
Electronics Forum | Fri Aug 24 12:24:35 EDT 2018 | davef
Could be ... Consider this: The LED and the BIG pad reflowed before the small pad. The superior force of the solder on the BIG pad pulled the LED over and the LED took the solder on the little pad along with it. Try this: Print paste on a board. No
Electronics Forum | Mon Dec 03 18:30:29 EST 2018 | slthomas
Not sure how the lead screw drive gear is locked in place but is it possible that it's slipping in both directions (when driving the rail both forward and backward) and then not catching until after the other end has already moved some? You could h
Electronics Forum | Mon Dec 03 18:31:06 EST 2018 | slthomas
Not sure how the lead screw drive gear is locked in place but is it possible that it's slipping in both directions (when driving the rail both forward and backward) and then not catching until after the other end has already moved some? You could ha
Electronics Forum | Wed Feb 24 23:08:03 EST 2021 | gabriel1blue
How are you? Thank you for your time and all you help. I hope you can help me out one more time? The machine got reset again and normally I would just enter the date backwards as a password and everything it's good now the date has ; character in-bet
Electronics Forum | Mon Jan 04 10:47:48 EST 2021 | mbass
Hi, As a user of EP P&P machines for over 20 years I have used Gen 1 & Gen 2 Trolleys. If you can get Gen 2 Trolleys with Elements that would be the preference as there are a few options available on the Gen 2 not on Gen 1. That said the Gen 1 Trolle
Electronics Forum | Fri Jun 09 16:01:27 EDT 2023 | atpico
Does anyone has any information about MY500 End Of Life and Spare parts availability? Are MYCRONIC MY600 cartridges backward compatible with MY500 ? Does these machines wear well? General reliability opinions? Thank you in advance. Hello again, f
Electronics Forum | Thu Jul 23 12:54:18 EDT 1998 | Brad Kendall
| I am considering of Philips FCM for the next production. | But I have heard a rumour saying this machine is not capable for checking the lead polarity due to the laser scan system. | i.e. SOT might be populated in wrong direction. | Can somebody ad
