Electronics Forum | Thu Aug 10 07:04:41 EDT 2006 | CL
Good Morning SWAG, We have had similar problems with our Heller 1800 EXL's when the chains would build up oil and debris. The only way we could get them clean was to put them into a self cleaning oven and carbonize the residues. We then rinsed them
Electronics Forum | Mon Aug 14 01:49:14 EDT 2000 | Joe
G'day, I am interested in hearing about the automatic lubrication of the chains in a reflow oven. The systems I have seem to work to a certain degree. They either lubricate too much, so we end up getting oil on the edges of the PCB, or not enough, w
Electronics Forum | Wed Aug 09 11:45:25 EDT 2006 | SWAG
We have an OmniFlo 7, 2000 vintage reflow. We are having conveyor problems. I checked the encoder and speed control board and everything is good per tech. manual operations. We removed the chains a couple months ago and thoroughly soaked/cleaned t
Electronics Forum | Wed Feb 20 12:50:32 EST 2008 | soudomphong
Where can I get Tribol 1421/SG high temp chain Oil? Thanks, Seth
Electronics Forum | Thu Feb 15 15:20:43 EST 2018 | dleeper
Auto chain oiling is a must have feature in my opinion. You can't have too many heating zones! More zones allows more finesse in your profiles.
Electronics Forum | Mon Mar 20 09:08:42 EST 2006 | mapell
AR Sounds like dirty chains... couple ways to check... Pull off the drive chain for the conveyor. Place a wrench on the (unload end) drive shaft and spin, if it is a bit tough.. dirty rails. Also look at load end of chains. The chain goes low and w
Electronics Forum | Sun Oct 13 22:19:28 EDT 2002 | mikestringer
Hi Everyone What lubricants do your maintenance people use for the chains in your Reflow ovens? The manuals for our ovens have one recommendation - but I am always open to other people�s experiences and recommendations. Another option may be easie
Electronics Forum | Wed Aug 03 10:14:59 EDT 2005 | Wonderboy
With oven temps rising due to Lead-Free Processing, I'm looking for some information on high temp Reflow Oven lubricants. I've found some info in the Fine SMTnet Archives on Chain Lubricants, (Mostly Synthetic Motor Oils), but I'm wondering what othe
Electronics Forum | Mon Nov 17 14:02:33 EST 2003 | Mark Peo
As you have seen, the 1088 doesn't need much in the way of P.M. We recommend: --Monthly vacuuming in the base and under the hood (ie Dust Bunny control) --Lubricate Edge Hold Conveyor Chain and leadscrew (if the Edge Hold Conveyor option is installe
Electronics Forum | Mon Mar 27 11:03:06 EST 2006 | mapell
Tribol 1430 is the latest generation oil, 930 can't take lead free temps. Please see the following link.... http://www.castrol.com/castrol/productdetailmin.do?categoryId=82958955&contentId=6004371 If your getting alot smoke and residue, reduce the
