Electronics Forum | Wed Jun 05 12:50:18 EDT 2002 | Steve
I agree with Rob. Why use NC if the board is going to be cleaned anyway? Water soluable is much easier to get off if the board needs to be cleaned. Why else would they call it "no-clean"? Steve
Electronics Forum | Thu Apr 02 11:12:34 EST 1998 | Justin Medernach
| Looking for Cleaning solvent to claen missprinted PCB, that will be good for paste (CS) and glue (PS). | One that is easy to evaporate with out leaving | white powder around component leads on CS (when cleaning PS) Ron, If you are running a no-cle
Electronics Forum | Fri Nov 12 12:28:21 EST 1999 | John Thorup
Just out of curiosity - are you sure it is the solvent? What is your process temperature? John Thorup
Electronics Forum | Tue Jun 04 22:50:27 EDT 2002 | davef
Cleaning NC flux res seems like a good idea. Try: * Kyzen Aquanox SSA * Alpha 2110
Electronics Forum | Mon Jun 10 07:44:47 EDT 2002 | pjc
Petroferm Hydrex DX and Zestron Vigon A200 works well to clean Alpha UP78 paste.
Electronics Forum | Wed Apr 01 11:08:03 EST 1998 | Bill Schreiber
Smart Sonic's 440-R SMT Detergent cleans all types of solder paste, wet SMD adhesives and post solder flux residue from misprinted PCBs, stencils and tooling. 440-R SMT Detergent is non hazardous and is certified by the Air Quality Management Distri
Electronics Forum | Fri Feb 10 11:35:44 EST 2017 | rgduval
150º de-ionized water, however, if you're doing hobby work at home, regular hot water will be fine. Just be sure to allow the water to dry sufficiently before powering up the board. You can also use IPA or a custom flux cleaning solvent available o
Electronics Forum | Tue Apr 07 18:05:40 EDT 1998 | Roxanne Picou
| Looking for Cleaning solvent to claen missprinted PCB, that will be good for paste (CS) and glue (PS). | One that is easy to evaporate with out leaving | white powder around component leads on CS (when cleaning PS) Solder paste cleaning can be acc
Electronics Forum | Fri Oct 07 15:49:58 EDT 2005 | Amol
Hi, Can anyone suggest what solvents are the best for manual stencil cleaning?? we are currently using alcohol wipes, but the fine pitch apertures still have solder paste stuck in between them. We should ideallyhave a stencil cleaner, but until that
Electronics Forum | Wed May 05 06:30:40 EDT 2021 | jineshjpr
Do Proper underneath stencil cleaning. if the cleaning not effective, check Vaccuum section of the printer machine. Else change the Wipe roll. Trying out with other cleaning solvent (dedicated to stencil cleaner) also improve this issues.