Electronics Forum | Fri Apr 15 07:53:40 EDT 2005 | mmjm_1099
For DEK supports heres a link for soft supports. http://www.dek.com/web.nsf/dek/formflex
Electronics Forum | Fri Apr 22 15:56:56 EDT 2005 | Valerie
Check out Transistion Automation. They are really reasonable in price. http://www.transisitonautomation.com or http://www.Board-Lok.com
Electronics Forum | Sun Oct 28 14:06:06 EST 2001 | kenbliss
Hi Paul There is free detailed information on how to reduce changeover time and to reduce bottlenecks on our web site at http://www.blissindustries.com then click on Bliss University, it is written as unbiased information on reducing down time du
Electronics Forum | Mon Apr 18 09:52:36 EDT 2005 | pjc
FormFlex and the GridLok system will not work on a semi-automatic printer. They were designed for fully automatic machines. The print table is very shallow on the DEK 248, SMTechs and MPM SPM, UP100 and MicroFlex. DEK should have magnetic base suppor
Electronics Forum | Thu Apr 21 12:07:30 EDT 2005 | ddennison
Here is the name of another good company to contact: Production Solutions, Inc. 12675 Danielson Court Suite # 403 Poway, CA 92064 P: 858-486-1088 F: 856-486-9178 Contact: Doug Farlow E-mail: dfarlow@production-solutions.com Web Site: http://ww
Electronics Forum | Fri Oct 26 11:34:44 EDT 2001 | pteerink
Paul, Many variables that affect changeover, here's a few to start with: 1) Feeder count- do you have enough feeders to be able to do a complete setup off-line? Take your product that uses the most amount of feeders, and make sure you have at least
Electronics Forum | Fri Oct 26 11:37:27 EDT 2001 | Dave G
You could start by putting together a matrix of P/N's vs product. This will tell you which parts are common with most of your jobs. These would then become part of a fixed feeder setup that would stay on the machine. (These will probably be mostly R'
Electronics Forum | Mon Oct 29 15:58:47 EST 2001 | davef
Kitting: Buy-in material in kit form that is complete and in the proper form. Line set-up: Layout all boards to be the same width. Printer set-up: Use a dispenser, instead of a printer. Dispenser set-up: Program & debug off-line. Placement machin
Electronics Forum | Thu Apr 14 18:28:20 EDT 2005 | darby
We use the standard supports that come with the machine. Print a 1:1 transparency of the first pass side of the pcb including mechanical outline and components. Your customer may need to supply this. Flip this over and tape it into position at th
Electronics Forum | Tue Sep 05 06:23:19 EDT 2006 | jonatf
Hi guys, I want to improve the set up of our printing machine(EKRA) especially on a 0.5mm thickness double sided boards.I find the support pins very time consuming.. any advice?? thanks.