Electronics Forum | Thu Feb 28 14:27:07 EST 2008 | cyber_wolf
The flux dries out and the paste sticks in the stencil apertures. As the flux dries it also causes the solder to oxidize. Hahaha ! I remember adding flux to paste back in the day to loosen it up. Do not do it ! I have been told by reputable industry
Electronics Forum | Mon Jul 06 11:17:56 EDT 2009 | slthomas
xcopy is probably the cheapest way, although it's a manual operation. We just used a batch (.bat) file called "backup" that ran xcopy on our pcb file directories and dumped the copies to a second hard drive on the same pc. If you can't install seco
Electronics Forum | Thu Aug 29 14:41:10 EDT 2013 | kdc45
We found we had a bad communication cable which caused all of the files to be corrupted. We then held the RESET down while powering up and it successfully dumped. We were then able to send status, proper and programs to the machines. Hope this helps
Electronics Forum | Fri Aug 25 16:45:27 EDT 2017 | vilobion
Company I'm at recently purchased a used Manncorp FVX pick and place benchtop unit, and the previous owner was unable to provide the actual installer for the software used to drive the unit- it looks like they dumped the folder from C: onto a disc fo
Electronics Forum | Tue Jul 26 19:03:40 EDT 2022 | aksaustin
It could be from your Deionized Mixed Beds. Resin on the mixed beds can have that smell if its bad or not flushed prior to use. Its a fishy/rotten eggs odor It would still happen if you dumped the water but didn't swap out the tanks and would smell
Electronics Forum | Tue Oct 12 04:33:15 EDT 1999 | Brian
| | | We have three buckets filled with leftover solder paste from our screen printing process. Kester has informed me that they no longer take paste, but only dross and pot dumpings. Does anyone know if there's someplace I can recycle this, or am
Electronics Forum | Fri Jul 03 03:49:06 EDT 1998 | chris Link
| | Has anyone experianced Core Dump errors with their MYDATA TP9? | | My machine (2/96) has 26 million placements and my operators | | have recorded 253 core dumps in 1996, 238 in 1997, and 18 in | | January of 1998. We run one job on the machine,
Electronics Forum | Fri Jul 03 03:47:59 EDT 1998 | chris Link
| | Has anyone experianced Core Dump errors with their MYDATA TP9? | | My machine (2/96) has 26 million placements and my operators | | have recorded 253 core dumps in 1996, 238 in 1997, and 18 in | | January of 1998. We run one job on the machine,
Electronics Forum | Tue Oct 12 16:26:01 EDT 1999 | Jeff Sanchez
| | | | We have three buckets filled with leftover solder paste from our screen printing process. Kester has informed me that they no longer take paste, but only dross and pot dumpings. Does anyone know if there's someplace I can recycle this, or a
Electronics Forum | Thu Jul 20 13:15:13 EDT 2000 | Bob Willis
I don�t think you are correct in the case that the legislation has been adopted only the proposed legislation has had the date changed. The main driving force seems to be commercial, making sure that if one company dumps and provides a lead free pro
