Electronics Forum | Thu May 06 18:18:15 EDT 1999 | JohnW
| OK, my manager read an article on printing glue (aaargghh!)and wants to know why we aren't doing it. We currently use Fuji GLs and GDMs to dispense glue. I've never done it, but have seen it done at NEPCON and other shows. It looks OK, BUT what
Electronics Forum | Sat Mar 06 10:25:55 EST 1999 | Earl Moon
I'm having a fun time between BGA rework/repair using an SRT 1000 and SPC efforts (much easier) using DEK stencil printing processes and BTU reflow with 6 Fuji lines in between. Concerning the BGA stuff, I'm getting about 60% success using this rewo
Electronics Forum | Fri May 24 11:49:55 EDT 2002 | stefwitt
Again, I would like to refer to the tape dimensions and their deviations. In an 8 mm tape the distance from the sprocket holes to the tape pocket is 3.5 mm +/- 0.05 mm. This tolerance is easy to achieve, because in the manufacturing process of the ta
Electronics Forum | Sun Jul 14 00:54:49 EDT 2002 | caldon
There are jobs out there....you just need to know where and what. If you are looking at Original Equipment manufacturers (Fuji,Siemens,exc.....) or CM's good luck! 1) you must be able to travel a fair amount 2)you may need to relocate. With that sa
Electronics Forum | Thu Dec 16 01:30:33 EST 2004 | vinitverma
I respect your statements about the FCM-I but only partially. Yes it was meant for ONLY HIGH VOLUMES, but in those cases, it has proved to be a masterpeice. Talk to those who've used the machines for 70000 hours or so. I have customers here that're u
Electronics Forum | Tue Oct 05 15:39:35 EDT 2010 | daxman
Hi Steve, I don't know if there are a lot of people who can decrypt the trace data. I think the manual mentions sending it to fuji for analysis. Maybe that would be something worth checking into. Regarding the Mecca check mode: I don't know if it wi
Electronics Forum | Tue Nov 20 11:19:07 EST 2018 | spoiltforchoice
Ahh but you're missing the key points. The YSM40 is in no way ever intended to operate on its own, to keep those 4 heads busy they all need to be placing high volume parts, combined with a high throughput of PCB's probably in dual lane mode which in
Electronics Forum | Mon Mar 08 20:17:41 EST 1999 | Michael Larsen
| | I'm having a fun time between BGA rework/repair using an SRT 1000 and SPC efforts (much easier) using DEK stencil printing processes and BTU reflow with 6 Fuji lines in between. | | Concerning the BGA stuff, I'm getting about 60% success using
Electronics Forum | Thu Jul 18 17:29:18 EDT 2002 | pjc
Forget what the machine's max. placement cycle rate is spec'd for. For each board you assemble time the actual placement rate. To do this start the stop watch the instant the camera is positioned over the first fiducial on the first board, then stop
Electronics Forum | Sat Mar 06 12:33:21 EST 1999 | Dean
| | I'm having a fun time between BGA rework/repair using an SRT 1000 and SPC efforts (much easier) using DEK stencil printing processes and BTU reflow with 6 Fuji lines in between. | | Concerning the BGA stuff, I'm getting about 60% success using