Electronics Forum | Tue Mar 29 03:10:58 EST 2005 | Rob.
CPH is speed, CPK is accuracy.
Electronics Forum | Mon Nov 24 17:27:39 EST 2003 | rrr
typically when i've seen this problem it is because the back of the mylar is sticky. Have you tried different parts?
Electronics Forum | Mon Nov 24 19:21:04 EST 2003 | alwil
Hi, I have seen this problem. Make sure that the peeler tape goes round all three pulleys as in the diagram on the feeder. Make sure the feeder clutch is oil free and not slipping. If everything is set correctly then it may be a component vendor i
Electronics Forum | Tue Dec 02 16:31:05 EST 2003 | ryanm
We have had the same problem for years. The way we have fixed this is by NOT winding the cover tape the way the diagram shows. We only use the roller that is connected to the index arm. Hope this works for you.
Electronics Forum | Mon Aug 22 09:34:54 EDT 2005 | Lee
i need documentation on off-line progrmming for fuji cp-642e can any1 help me?
Electronics Forum | Wed Jun 27 08:33:27 EDT 2007 | pekantol
Have you measured the preQ rotation station(st3).Is it workin correctly?
Electronics Forum | Fri Feb 22 08:23:51 EST 2008 | aj
All, I understand that there is a requirement to upgrade the narrow view camera on the Fuji CP642 to place 0201 components - is this necessary ? Also, 1 - What tape package to they come in ? Can you use 0402 feeders? aj...
Electronics Forum | Sun Jul 11 21:10:27 EDT 2010 | fujiphil
First, check the sensors for 17th and 19th station....tune the sensor amplifier if necessary. Then, check the dogs on the nozzle holders... If the above, items are ok... check the 13th station clutch engagement. Calibrate if necessary... fujiphil
Electronics Forum | Tue Jul 13 10:51:55 EDT 2010 | muarty
Sounds pretty much like the sensors/amplifiers need tuned on your machine. It is a fairly straightforward exercise to do this. The sensors basically look at the back of the chucks to determine which nozzle is in the lowest position and therefore whic
Electronics Forum | Tue Jul 13 21:05:04 EDT 2010 | dman97
Thanks for the replies. Indeed the amplifier needed to be tuned. I have recalibrated it and all is working as it should. Thanks for the advice.