Electronics Forum | Sat Apr 13 16:34:00 EDT 2013 | jimmyboz
Most likely battery back up card, might be 1931, 1932,ect. It thinks there is a power failure
Electronics Forum | Mon Apr 15 20:44:00 EDT 2013 | dman97
So I swapped the memory card out and it seems to be a bit better. It doesn't kill the 24v power quite as much anymore. Thanks for the tip. I will monitor this throughout the week.
Electronics Forum | Fri Oct 23 10:40:29 EDT 2015 | kurtiss
The machine will allow more functions other then power off, forgot to press reset button. Any one know what ESC 3 means?
Electronics Forum | Sat Nov 07 13:29:12 EST 2015 | jimmyboz
The machine will allow more functions other then > power off, forgot to press reset button. Any one > know what ESC 3 means? Promise me 3 peanuts and a book of matches, and i will try to find out. I mean, are you still having the problem?
Electronics Forum | Thu Jun 02 21:27:59 EDT 2022 | rdssmt
Jerry thank. I did check this but I going to change the sensor. Do you have CP643? This machine I have 2 years that not power on and lost the proper, do you have one copy? Thanks.
Electronics Forum | Thu Aug 22 13:31:23 EDT 2013 | bvdb
Re-doing this thread as original seems to have been shortened. Our beloved 24 year old Fuji IP-1 fine placement machine won't start. Has been working fine for the past 6 years but now when the Power button is pressed the power comes on but the FAIL
Electronics Forum | Sun Aug 20 02:31:18 EDT 2006 | daxman
Last week, when we turned on our IP3, we received an error on our IP3, which read "Fatal Error with VP Turn Power Off" We had been running product the day before, and the day after we received this error. The function keys are locked and will not w
Electronics Forum | Mon Oct 26 02:00:36 EDT 2020 | chucherry5076
https://www.jrpanel.com/R The heat generated by electronic equipment causes the internal temperature to rise rapidly. If the heat is not dissipated in time, the equipment will continue to heat up and the components will overheat and fail, resulting
Electronics Forum | Tue Jun 21 19:25:10 EDT 2005 | darby
This is basically the reply that I had from Heller ovens regading this - "The recommended air flow is at the back of the machine near the vent. From the book I copied from you it should be 500 CFM. If you do not achieve this figure, it not a great
Electronics Forum | Thu Dec 20 23:56:35 EST 2007 | isd_jwendell
I run a prototype/small-run shop, so I'll include some recommendations too: 1) Don't buy a machine for just what you are doing today. Once you get into this field you will find demand to do more. 2) Don't scrimp on the stencil & machine. You will spe