Electronics Forum | Mon Jun 12 17:54:17 EDT 2017 | simons
The machine does not move to the home position. Once we hit the "Home" button all three heads will move up to the "Home" position but then 5 to 10 seconds later the following error pops up "Error 1531 - Z Axis motor alarm" before any "xy" movement i
Electronics Forum | Wed Jan 05 16:43:41 EST 2005 | mee13
what size feeder are you using there, when does this alarm occur :during prod?
Electronics Forum | Fri Jul 25 14:47:16 EDT 2014 | hlansberg61
Trouble shooting.
Electronics Forum | Thu Jul 31 13:58:48 EDT 2014 | jimmyboz
I meant to end the last post with "month will get worse".
Electronics Forum | Fri Aug 01 08:15:49 EDT 2014 | kurtiss
Thank you, Kurtis
Electronics Forum | Fri Aug 01 12:04:54 EDT 2014 | jimmyboz
That's great.
Electronics Forum | Thu Feb 14 21:52:56 EST 2008 | keithej2
Thanks for the reply. The IP3 we're working on is a 4400. We installed a new motor/encoder today but it didn't help. So far we've swapped the CPU, vision card, both LSOs and the servo cards. We've been poking around the relays and wiring tonight but
Electronics Forum | Mon Jun 19 10:10:18 EDT 2006 | rmitchell
Hi, Our CP6-5 has a Z overflow error when trying to zero set. The table moves in X and Y and almost zeros prior to the Z overflow. Servo Amp? Rob
Electronics Forum | Wed Jun 21 09:23:28 EDT 2006 | rmitchell
problem solved. Some PCB table support pins were jammed down in the table preventing the Z axis from lowering all the way. The intial error mesage was x and y servo, but the real error was the z axis overflow. Rob
Electronics Forum | Tue Jul 11 08:14:03 EDT 2006 | jdengler
Are the axis's lubricated? Check the servo amp null and 0 speed settings. Jerry
