Electronics Forum | Sat Feb 04 10:02:53 EST 2017 | mikekeens
GC-PowerPlace from http://www.graphicode.com/ will do this but takes time to get to grips with and can be time consuming depending on the design complexity and the type of data available. Ideally i recommend asking for CAD data as this will contain
Electronics Forum | Tue Mar 24 23:44:17 EDT 2020 | kghadiya
I am having trouble programming circuitcam for mydata (my9) pnp machine. My question is, when i digitalize the gerber file what should i take care to get required output for my9? In my9 i cant see exact positions of all the components. I have assign
Electronics Forum | Fri Mar 27 12:46:23 EDT 2020 | unisoft
Unisoft has been import gerber only for years to setup assembly, aoi machines, etc. *** Help for Importing GERBER only files for used in programming Assembly, AOI, Test, Selective Soldering machines (X/Y Center, Rot, Part#). Also allows you to cre
Electronics Forum | Wed Apr 15 18:37:15 EDT 2020 | unisoft
The point here is if you can't get the full CAD files or the XY rotation files and all you get his Gerbers and a BOM. Most all contract manufacturers and some OEM's at some time or another have to deal with Gerber only files. If you find yourself i
Electronics Forum | Fri Nov 24 22:32:12 EST 2017 | myke03o
Some Customers normally don't share CAD data in order not to copy the design. What you can do is use the Pick and Place file then plot to the pcb paste/silkscreen layer of the gerber using software. Not sure if your universal machine can load a gerb
Electronics Forum | Fri Oct 30 19:37:26 EDT 2015 | sarason
If you want to go down this path there is a piece of free software from a dutch programmer called Visualplace. It is available here. http://www.compuphase.com/visualplace/visualplace_en.htm If you want to work from CAD files there s my sofware call
Electronics Forum | Sun Feb 16 11:14:07 EST 2014 | unisoft
As mentioned the ProntoGERBER-CONNECTION software from Unisoft ( http://www.unisoft-cim.com/gerber_connection.htm) does the Gerber to intelligent shapes (ref des, x/y center, rotation, p/n, etc.) function for over 25 years. If you wish I'm availab
Electronics Forum | Mon Nov 17 08:01:44 EST 2003 | stefwitt
The format is X,Y Theta of the component center for all placement machines. Gerber data can be useless, unless you have the reference from pin 1 to the component center. Some machines offer a CAD convertion tool. I don't know any machine, which can
Electronics Forum | Fri Apr 10 10:31:47 EDT 2020 | proceng1
Certain customers do give us CAD. USUALLY ODB++ but I've also gotten .ipc and .pcb . Many of our customers bought or inherited a design, and therefore have no control to generate additional files. Or, as you mentioned, they had another manufacture
Electronics Forum | Thu Apr 09 20:18:31 EDT 2020 | jlawson
Can not speak for CircuitCam is made by Aegis Software I veliveve sound like need to get understanding of how tool is supposed to work to extract-create centroid positions. Using Gerber Only is a pattern match and cacluate logic process - ie make pac