Electronics Forum | Wed Jul 20 13:46:17 EDT 2011 | mosborne1
Does anyone have a source for high temp PCB racks? Fancort makes them, but they do not make high temp racks like we need. We used to buy Calmark and they do not make them any longer..
Electronics Forum | Fri Jun 01 14:13:50 EDT 2018 | jsmith01
Does anyone have a good supplier of High Temp Chain Oil for a reflow oven in the United States?
Electronics Forum | Fri Dec 22 12:17:02 EST 2000 | vickij
Hi! Has anyone out there ever tried to use a high-temp and a low-temp solder paste on a double-sided board without using an adhesive? (Populate the bottom side with the high temp paste, reflow, turn it over, then run the top side). I looked in the
Electronics Forum | Wed Aug 03 11:08:24 EDT 2005 | PWH
We use the following stuff from "Biral USA": BIO30 Synthetic High Temp Oil � Chain Oilers NMG-400G � No melt grease - miter gears/lead screws AS500ML � Anti-size spray - lead screws, drive sprockets, rail support L-brackets It seems to work good
Electronics Forum | Tue Aug 26 09:30:56 EDT 2003 | Jim Z
Marc, There are many types of nylon used in the connector industry and some are designed to be used in high temperature (225-250C) oven reflow applications. These high temp nylons are usually types 4/6 and 6T. It sounds like you are either using a
Electronics Forum | Fri Dec 16 10:57:38 EST 2022 | sarason
In the automotive industry there has been a swing away from gaskets and a movement to high temp resistant sealing compounds. In all probability your original gasket would have been viton for high temp O-rings. So if that is the case the replacement
Electronics Forum | Fri Nov 22 08:59:49 EST 2002 | ksfacinelli
I would have to agree with the to high temp being a real problem. I have seen this with the WS-609 alpha paste. If you run it up to high in temp. The joints appear to be cold but they are really just over fried.....definitely try reducing temperat
Electronics Forum | Tue Nov 07 14:31:01 EST 2000 | John
My company manufactures a board for a heavy duty automotive application. One of the through hole parts on the board dissipates enough heat that it requires high temp solder. Does anyone know of or have experience with a high quality selective solde
Electronics Forum | Tue Jun 27 11:10:20 EDT 2000 | L Lovell
I need a reball kit for high temp balls. can anyone help? Thanks Leon
Electronics Forum | Fri May 14 00:34:22 EDT 1999 | Mike D.
| I need some pics or documentation on how a finish soldered joint looks like for SMT component. I have various people who supposedly says has knowledge with High Temp says my joint could look better. The joint looks shiny and great except for a grai
