Electronics Forum | Wed May 10 11:03:04 EDT 2006 | Mike Konrad
I would be far more concerned about the flux residue intentionally left on the board than the �dust bunnies� sticking to the flux. In �perfect� no-clean applications, flux residue, although present, is nearly invisible and marginally conductive. In
Electronics Forum | Fri Jan 19 20:55:56 EST 2007 | Mike Konrad
The answer depends on the cleaning / defluxing method. There are many fine chemicals available. One must first consider the cleaning method, then safety (environment and operator), then cost. For automated board cleaners (defluxers), consider th
Electronics Forum | Wed Jan 24 17:34:27 EST 2007 | Mike Konrad
You may want to contact Bill Petlock at 1.877.PETLOCK http://www.petlock.com. He is a used equipment dealer and may be able to help you with a manual. Also, try contacting ECD (the original manufacture of said equipment). 503-659-6100 http://www
Electronics Forum | Thu Mar 15 02:25:04 EDT 2007 | Mike Konrad
Dave, I would not recommend use of a multi-meter to determine high quality DI water resistivity readings. There are a number of reasons including a multi-meter�s lack of temperature compensation. We use a Myron-L resistivity meter to accurately de
Electronics Forum | Thu Jul 26 13:08:59 EDT 2007 | Mike Konrad
The best method of cleaning misprinted boards is with a stencil cleaner. I would not recommend the use of a spray-in-air system for misprints. Spray systems can cause solder paste to become embedded into vias and under components (if double sided).
Electronics Forum | Mon Aug 25 19:27:11 EDT 2008 | Mike Konrad
There are a number of �low cost� stencil cleaners available. I am a manufacturer of one but I'll list a variety and let the others provide editorial on which is best. Basically, there are three technologies, manual cleaning (solvents and wipes), ul
Electronics Forum | Mon Sep 08 11:53:15 EDT 2008 | aqueous
Here are links to articles on that subject: Can You Clean a No-Clean Assembly? http://www.residues.com/pdfs/Circuits%20Assembly%20Articles/2003/low%20res/2003.01-Can%20You%20Clean%20a%20No-Clean%20Assembly%20-%20Circuits%20Assembly.pdf Component
Electronics Forum | Thu Sep 11 19:19:07 EDT 2008 | Mike Konrad
Most ionic contamination testers prompt the operator for the current concentration at the start of each cycle. The normal concentration is 25% DI Water and 75% IPA. Although most machines ask for the current concentration, concentration adjustments
Electronics Forum | Tue Sep 07 22:38:25 EDT 2010 | aqueous
As with so many things, some brands work very well on high density, low profile assemblies and some do not. Because my company manufactures these machines, I don't want to use this forum as an advertisement so I will recommend the following: 1. Sen
Electronics Forum | Sat Jun 15 21:16:44 EDT 2013 | Mike Konrad
The ICOM 5000 was made by Trek Industries. The company was purchased by Stoelting. I don't think they make or support these machines anymore. By the way, the correct formula for area is Length X Width X 2 (X 1.3 or 1.5 based on component geography)