Electronics Forum | Mon Mar 21 20:22:20 EDT 2022 | kumarb
then would crash everytime. Not to give up, started to experiment with the markers inside the vios text file. The hack was to remove the MARK fields inside the file. After this, saw the component layout in the GUI PCB view with proper references. S
Electronics Forum | Mon Dec 12 09:41:57 EST 2022 | poly
Thanks Peter, when I open feeder teach i'm presented with a bunch of actions. I can't find docs on what the different actions are. Do you know which one I should do? I have attempted to teach the corners but the value it gives put the PTF pick point
Electronics Forum | Sat Oct 09 03:45:34 EDT 1999 | Brian
| Right now,we have some problem on SMT. Cause of the flux residue | in the connector. Do somebody have the same symptom? By the way, | can i find something to make the flux observe easy or take a photo with the flux. | | | Unfortunately, this pr
Electronics Forum | Mon Jul 19 19:22:09 EDT 2004 | g2garyg2
Laser Marking stations generally accept the product, clamp it in place, then through a motion platform move the product underneath the laser head. Marking is generally conducted with a CO2 laser ranging between 20 to 30 watts. You will loose 20% thro
Electronics Forum | Fri Aug 27 12:00:54 EDT 2004 | pemnut
Looking in My book, it describes "E" in the last data field as follows. Load error. This function code is not programmed as part of a pattern step. The controller uses the E code as an error marker. While a pattern program is being loaded into memory
Electronics Forum | Mon Nov 08 17:47:58 EST 2004 | davef
Russ: On "usually get some mask material from our board house. It cures with heat so it works really well in our applications.": We're unsure about the type of mask that you are using, but be careful [we used to do this, also]: * Final cure of the L
Electronics Forum | Mon Feb 04 22:39:51 EST 2013 | armandogomez
Ok we have to admit that for some reason you went for the used machine, but the $6000 are worth it, I have 2 of the same machine without the NG marker, and in 4 years (the newest one ) and like 6 o more of the old one, there have not been a mech prob
Electronics Forum | Fri Mar 20 10:26:05 EDT 2015 | g2garyg2
For laser marking the mark quality is directly related to the PCB composition. If you want to guarantee a good mark every time and have control over the PCB being built (not always the case for contract Mfg) as the other responder stated, placing a w
Electronics Forum | Mon Sep 12 03:38:03 EDT 2016 | rob
Hi John, We picked up a used laser marker (Asys ALS03) last year for around 30K euros and it has done approx 2M codes (we use 6mm square QR) in the last year without fault - it reads them all back to confirm which is handy. We also use labels, and
Electronics Forum | Tue Feb 06 04:54:39 EST 2018 | Robl
Smells a lot worse even with good extraction. Key things to look out for is laser life on your thickness and layup of panels compared to spindle motor life (Typically 10,000 hours, or 2 years for us) and cost of replacement lasers. We get spindle
