Electronics Forum | Thu Feb 17 22:30:09 EST 2000 | Dave F
Alberto: There's no rules, but it works sorta like this: RESISTORS Usually marked in ohms using a standard code: First two numbers is the value Third number is the multiplier 102 = 1.0 x 10� ohm = 1000 ohm = 1 kW CAPACITOR Usually not marked. When
Electronics Forum | Thu Feb 17 22:30:09 EST 2000 | Dave F
Alberto: There's no rules, but it works sorta like this: RESISTORS Usually marked in ohms using a standard code: First two numbers is the value Third number is the multiplier 102 = 1.0 x 10� ohm = 1000 ohm = 1 kW CAPACITOR Usually not marked. When
Electronics Forum | Mon Sep 28 09:18:30 EDT 1998 | Ben Wilmot
The majority of SMT resistors use the following notation. 10 X eg 153 represents 1k5 resistor The third digit in the sequence denotes the number of zeros to add after the first two digits giving the value in ohms. Many Caps will follow the same nota
Electronics Forum | Mon Nov 10 16:43:24 EST 2008 | markgray
Steve, I finally played with it enough that it is working again. I ended up with Edge Threshold: 19; Intensity Threshold: 60; Offset: 200; Gain: 16 The problem seemed to be with the Intensity Threshold. I was not getting an error code on the screen
Electronics Forum | Mon Jul 19 19:22:09 EDT 2004 | g2garyg2
Laser Marking stations generally accept the product, clamp it in place, then through a motion platform move the product underneath the laser head. Marking is generally conducted with a CO2 laser ranging between 20 to 30 watts. You will loose 20% thro
Electronics Forum | Wed Feb 24 22:53:32 EST 2021 | solderingpro
Panasonic has a great training facility in Kentucky that could be of enormous benefit to you and your team. Materials and Lasers range in capability. Generally speaking you need good contrast; which is not always guaranteed with bare PCBs. As othe
Electronics Forum | Thu Jul 25 15:18:18 EDT 2002 | stefwitt
You would have to tell us what machine brand you are using, as everyone has his own idea how to recognize X-outs. I find the auto-recognition very time consuming ( non-productive machine time ), unless the camera could recognize an image in one shot
Electronics Forum | Fri Mar 23 08:46:09 EDT 2012 | rwyman
I think you need some new suppliers. Any reputable supplier will have the M-code marked on the outside of the pkg, as that's a req't of J-STD-033. So if it ain't there, tell them they need to properly mark the pkg. Them telling you to "check the i
Electronics Forum | Tue Apr 07 09:35:29 EDT 1998 | Chris Jackson
I am looking for suppliers of SMT setup verification systems that use bar code lables as the medium. I have located Brady and Unicam's verifeed. We have immediate need due to the push to remove component markings. We have two lines presently: Panason
Electronics Forum | Thu Jan 03 10:43:48 EST 2002 | davef
Just thought of something. Sorry to be late with this. If you decide to dewarp these boards, consider: * Marking the boards perminantly with a code to help key your failure analysis people that a customer return was processed differently than other
