Electronics Forum | Wed Aug 03 16:00:16 EDT 2005 | mfoster
There are vast differences in the use of the word "refurbished" in reference to used equipment, ranging from the repaint job referenced by Stefan that some "dealers" offer, to what is generally offered by the original manufacturer that perhaps Mike r
Electronics Forum | Wed Jan 23 13:02:35 EST 2008 | tbkonrad
Thanks for the info. I called Mike Tieman earlier and he recommended I do the exact same things. He said that there should be very little resistance on the theta of the Z-rods, (not the case) so he recommended that the P4 head be replaced. Mike is
Electronics Forum | Mon May 24 13:11:12 EDT 2010 | deanm
A guideline that I use agrees with MikeS: For 20mil pitch, apertures should be 9-10mil with a stencil thickness of 5-6mils to achieve an acceptable aspect ratio of 1.7. Just be sure you are using a mesh Type 3 or 4 solder paste. Otherwise, larger par
Electronics Forum | Tue Aug 17 08:46:04 EDT 1999 | M Cox
| | I don't know if you have tried this but... | | What if after removing the bad connector, while the holes are still molten you insert the new one right into the holes? | | | | This is the way we do it, and it seems to work | | | | Good luck | |
Electronics Forum | Tue Sep 08 10:00:58 EDT 1998 | John Ryder
Mike, Check out the Philips website at www.philips-ia.com and look at the FCM and the GEM Sapphire. The Sanyo/Universal is a fine chipshooter, but the Philips FCM is unmatched in pure speed, cost per placement and cost per square foot. If the Sanyo/U
Electronics Forum | Wed Sep 02 08:45:19 EDT 1998 | Jon Medernach
Mike, I tried to email you but your address is NG. I have a better idea, faster, more flexible, more accurate, less expensive, with a larger install base worldwide than Sanyo. Call me at 508-485-6239 | Hello all! My name is Mike Cannon and I'm a sm
Electronics Forum | Thu Jan 16 15:55:31 EST 2003 | MA/NY DDave
Hi I have a funny feeling that Mike Konrad and I know each other from IBM-Endicott days, yet I could be wrong. It would be funny?? Mike gave a good answer. The Rosin or Rosin Mildly Activated Flux (RMA) if on the board at ICT (In Circuit Test) wil
Electronics Forum | Mon Oct 11 12:27:48 EDT 1999 | Mike Demos
Thank you all for your replies. I guess my age in this industry is showing. This military spec. does not appear to be in existance. So, let me make my request a little more to the point: Is anyone aware of a specification specifically referencing
Electronics Forum | Thu Sep 17 00:17:44 EDT 1998 | Kevin DeLillo
Mike, We have a kit available that you can use. I'll call you to discuss further. Regards, Kevin De Lillo | I am attempting to locate a kit to be used on surface mount equipment to determine the placement capability (CPk). Does anyone have informat
Electronics Forum | Mon Aug 31 12:48:01 EDT 1998 | Michael Allen
We own two Sanyo chipshooters (TCM-1600 & TCM-3500), and our experience w/ this equipment has been very positive. Contact me w/ any specific questions. | Hello all! My name is Mike Cannon and I'm a small business owner looking at some of the SMT equ
