Electronics Forum | Fri Apr 01 14:51:23 EDT 2011 | jaimebc
We are currently experiencing a high rate of false calls on our 0402 chips. Resistors for the most part. Has anybody out there found a setting where this false calls are minimized? We are using top red light, pattern inspection,color inspection ( wh
Electronics Forum | Wed Feb 20 10:26:56 EST 2013 | wbailey
I am getting a lot of false calls on our AOI(YTV F1)on low contrast part markings like brown-on-yellow tantalum capacitors and etched oscillators, and on lead banks where the pcb has the part outlined in silkscreen. We are contract and cannot change
Electronics Forum | Thu Mar 01 14:33:50 EST 2007 | rhorowitz
Dear Hansa, I appreciate your interest in the MIRTEC AOI Inspection Systems. I am a Regional Sales Manager for MIRTEC. I would like an opportunity to speak with you regarding your AOI Application. Please call me at (203) 881-5559. Sincerely, Robe
Electronics Forum | Tue Aug 20 13:01:48 EDT 2013 | sevenzero
I read through this thread somewhat and checked out the pictures. I've programmed TH lead checks on a newer Yestech and an older Mirtec. I personally use the Yestech white-top/histogram check and the only solder inspection Mirtec has. In my experienc
Electronics Forum | Thu Apr 27 05:45:20 EDT 2017 | pavel_murtishev
methos1979, 1. Mirtec, Marantz 2. Koh Young, Orbotech, Mirtec 3. Koh Young Zenith 4. Definitely Programs for 3D AOI are prepared really faster. Having defined component database, programming takes no more than a couple of hours. Fine tuning takes u
Electronics Forum | Fri Nov 04 09:29:36 EDT 2011 | remullis
You should also have a backup calibration file to reinstall. If its software related this would put everything back to spec. Mechanically I would call Mirtec as well to ask the best method so that you dont have to reteach all your boards.
Electronics Forum | Thu Mar 29 08:23:02 EST 2001 | CAL
Some AOI manufacturers require you to put in a GOLD PCB. Gold PCB is a perfectly manufactured board - Correct placements, correct polarity, no solder short, a "GOOD" PCB. With the vision limitations of some AOI equipment components that have variatio
Electronics Forum | Fri Oct 31 12:50:12 EDT 2008 | devgru
Dominik, I have to agree with Andrew on his choice of Inspection Technology, but not the vendor. I looked at 2 of the 3 that you are asking about (TRI did not make my cut as I just didn't get a good feeling from them). I also looked at the Mirtec and
Electronics Forum | Mon Apr 17 18:29:03 EDT 2006 | lit
There is learning on all brands requiring fine tuning the test parameters. The first point is not to allow defects to escape. Many brands can do a good job with preventing escapes. The struggle with all the brands becomes false calls. The companies r
Electronics Forum | Thu Mar 26 21:03:24 EDT 2009 | bigdaddysoy9
I have noticed this on some of our large multi-circuit panels. It's such a slight rise in our false call rate that I haven't really explored it. I'm just guessing that it has something to do with the fiducials calculating the twist/shrink of the boar