Electronics Forum | Wed Aug 24 10:24:33 EDT 2011 | bobsavenger
Yeah, we use the Mole also for setting up a new build but I was wondering about a quick validation. Thanks for your input.
Electronics Forum | Wed Sep 14 09:19:30 EDT 2011 | swag
Target those specific parts/leads with a thermal-couple and a mole and try to get the peak reflow temps up to 225 C. It's not a cure but it will improve the apperance of the solder joints.
Electronics Forum | Thu Aug 11 20:12:12 EDT 2016 | davef
Different points on the board couple have different thermal masses. Look here: http://www.ecd.com/portals/5/products/vmole/V-MOLE-Verify-3-Thermocouple.pdf
Electronics Forum | Mon Feb 13 08:25:40 EST 2017 | emeto
It looks like you got all the paste to a liquidus stage and ten probably to a gas stage, so it is just a matter of running the mole several times.
Electronics Forum | Sat Mar 04 17:41:38 EST 2006 | samir
Wavemaster Larry must be new to the forum. What a nut! Sounds like a dude who needs to get his internet access taken away. In Riyadh, Larry, you'd get your arms sawed off for those comments! Grant is right. Hardware-wise, all thermal profilers
Electronics Forum | Fri Aug 11 17:21:43 EDT 2000 | Dave F
John: Sorry I'm tardy getting back to you on this Heat capacity = [applied voltage in volts*applied current in amps*(time ending in seconds - time start in seconds)]/(�K ending - �K start) The units of heat capacity are joules per mole-degree when
Electronics Forum | Tue Jul 30 14:07:01 EDT 2002 | cnoonan
Slim KIC would be my choice out of these two vendors. I have worked with several different makes and models and I would say DataPaq was my favorite. But it all depends on your needs and budget. They can all get the job done. Good luck with your
Electronics Forum | Mon Mar 22 19:46:17 EST 2004 | pdeuel
The bottom side is going into reflow somewhare near melting point of solder. Reduce bottom side temprature. Get a good mole so ramp and soak tempratures can be checked on bolth sides of the PCB. The object is to keep bottom side parts from approching
Electronics Forum | Thu Sep 23 15:26:30 EDT 2004 | Tarheel
Ours says Model: WD1D200KCN Input: 120 VAC 60HZ Output: 9VDC 200mA Class 2 Transformer Power Supply E31-0900-25 Electronic Control Design, Inc. Milwalkie, Oregon USA
Electronics Forum | Tue Feb 21 13:40:11 EST 2006 | slthomas
The SuperMole Gold uses a proprietary rechargeable Ni-MH battery design and while it's a nice unit and I'd love to have one now, I wouldn't want to have to replace the battery. In other words, it's going to cost you. FTR, the last one I used was rou
