Electronics Forum | Mon Sep 08 09:34:32 EDT 2014 | cflames17
Anytime before 1pm eastern time today should be good. we have Mycronic installing New My200's this week. He is do to arrive sometime after 1pm. I will be glad to be of assistance.
Electronics Forum | Tue Sep 09 17:09:44 EDT 2014 | chemers
Thank you to all. The problem was dust in the x wagon motor. We cleaned the motor out and everything works again. Rebecca
Electronics Forum | Thu Sep 11 17:18:13 EDT 2014 | tech1
You may want to check the brushes in that motor, could very well be the "dust" that you have seen.
Electronics Forum | Thu Sep 11 17:23:05 EDT 2014 | chemers
The brushes are terribly worn, but we put them back in until we got new ones. We have them and will be replacing tomorrow. Thanks.
Electronics Forum | Tue Apr 25 08:07:17 EDT 2017 | dekhead
Not a MY expert, but would suspect the computer PSU. DCV drop during boot will definitely cause this symptom.
Electronics Forum | Tue Apr 25 17:09:02 EDT 2017 | tomwd
Is the computer PSU located in BM4CB unit and get the 12v/5v voltages generated from 12v/5v box via the XP5/12v cable?
Electronics Forum | Wed Apr 26 07:32:46 EDT 2017 | bk
If you open up the back panel of the unit where your mot boards and cpu are there is a panel with test points. You can test all the dc voltages there including the 5 and 12 volts ones for the cpu.
Electronics Forum | Wed Jun 05 13:07:57 EDT 2019 | tey422
Last time I play with Mydata machine is over 10 years ago. If I remember correctly, you should able to see it when you log in as "higher" user level.
Electronics Forum | Fri Feb 14 12:37:08 EST 2020 | bilalfarooqi
Hey Rob, I don't know where the MOT cards are located on MY12 or how to change them. Do you have any documentation or instructions on how to change the MOT cards?
Electronics Forum | Tue Jul 14 13:20:13 EDT 2020 | tomdegas
I have a MY12 running TPS 2.8.1 and I need to know how to calibrate the X wagon Visin system. The machine is off in the Y direction after I removed and replaced the camera.