Electronics Forum | Wed Sep 23 08:19:52 EDT 2009 | rgduval
Check to see if there's a loose cable, or something, that's randomly setting off the light curtain. We occasionally have that problem with some of our flex or 12/16 mags in our TP9, where the tape take up clip is loose (nothing in that feeder) and i
Electronics Forum | Fri Dec 11 19:52:39 EST 2015 | dontfeedphils
I've dealt with MyData, Assembleon, Fuji, and Juki over the last 9 years with the majority being MyData and Juki so I'll talk about them. MyData was very nice for high mix/low volume due to the ease of setup and smart feeders, but I felt like I was
Electronics Forum | Fri Jul 31 12:53:58 EDT 2009 | dyoungquist
On our Mydata machine, we place a piece of scrap bare pcb next to the pcb we are loading. Using double sided tape, we attach the cut tape strip to the bare pcb, then program the machine to pick up the parts from that location. The smallest Mydata m
Electronics Forum | Fri Nov 07 06:45:13 EST 2014 | cot628
Has anybody had issues with the Mydata centering jaws causing esd and part damage. I understand we can lower the force on the components but ESD is my main concern. In the past I heard of companies testing the centering jaws because of this concern.
Electronics Forum | Mon Nov 10 06:54:19 EST 2014 | cyber_wolf
It's called running every day 3 shifts for 22 years. Anyway....My precise numbers aren't handy but lets just say a lot of parts were placed in that time. I would be pretty confident in saying that the centering jaws do not cause ESD damage on Mydat
Electronics Forum | Tue Feb 04 05:15:40 EST 2014 | spoiltforchoice
Take a look at the ROI tools supplied my MyData and others and draw inspiration from there. Presumably if you are looking at a higher speed line you are looking at higher throughput than you currently achieve or possibly fewer/shorter shifts? The eco
Electronics Forum | Mon Nov 10 09:11:51 EST 2014 | rgduval
The centering jaws are made out of copper, I believe...and conductive. I'd suggest that the conductivity of the copper makes it a fairly poor source of ESD damage in a component. I have observed physical damage to components from the centering jaws
Electronics Forum | Thu Sep 19 04:21:11 EDT 2013 | spoiltforchoice
The budget is very small, if there is genuinely a saving to be had by moving this work in-house and away from subcontracting you should really be able to justify spending more. If you can't increase the budget maybe try shopping around for more compe
Electronics Forum | Thu Aug 05 15:06:02 EDT 2021 | tey422
The last time I work on the Mydata machine was like over 15years ago. Sorry, I couldn't provide much more help than what I could remember so far.
Electronics Forum | Fri Aug 06 14:01:53 EDT 2021 | tomdegas
Unfortunately all my tools are spring loaded. Yes I do know the tool install utility. I have been running and maintaining the 3 MyData machines for over 20 years and I never saw an error like this. I grease our tools once a month so I know that is