Electronics Forum | Tue Jan 02 09:54:56 EST 2007 | slthomas
Chalk this one up to semantics. Regardless of when you start pumping (do you use a needle with a foot? In that case the pump will run when the foot touches the board), your volume of epoxy is the same. You just have less room for it where there is si
Electronics Forum | Wed Oct 15 23:49:42 EDT 2014 | padawanlinuxero
Rob, I couldn't write it better, really sometimes we mess up a pristine surface mounted pcb with the nasty ol'flux, but anyway a flying probe is that a set of needles touching a pristine surface of a pcb, to test different components, try in youtube
Electronics Forum | Thu Sep 10 10:04:27 EDT 2015 | emeto
1. Automated optical inspection(this is a machine that checks for you using camera and software algorithms for recognition) 2. Electrical test. For any PCB a test device can be made. A standard one will look like this: Put the board in the device. Go
Electronics Forum | Fri Feb 03 15:32:28 EST 2017 | westshoredesign
Not sure exactly what kind of coverage your looking to get but we use Dow Corning 3-1944, it's room-temp cure and rather thick, (think warm honey). But we have found it useful on several projects. http://www.dowcorning.com/applications/search/produc
Electronics Forum | Tue Feb 07 10:25:37 EST 2017 | ttheis
Thanks for the tip. I'm still getting familiar with the machine by reading the manuals as I have time. Was wondering what type of solvent you use to clean the dispensing mechanism parts? Or do you not clean anything and simply dispose of the syring p
Electronics Forum | Mon Feb 20 13:02:22 EST 2017 | ttheis
We tried both of these suggestions and the 3-1953 is less viscous than the 3-1944 so it will flow better on the board for our conformal coating application. What cleaning solvent is recommended for cleaning off the auger parts, etc.? I haven't been
Electronics Forum | Fri Dec 15 11:24:54 EST 2023 | dimamalin
Hello! I want to inquire about settings for MPM printers with the Camalot inside system. We will use Koki JU-R45 adhesive and Koki S3X58-M406-3 solder paste with a 21ga needle. If anyone has a similar system, could you please share the initial parame
Electronics Forum | Wed Feb 23 16:14:39 EST 2000 | John S.
John, We have a Camalot 3800 that we have used to prototype double sided reflow boards. The flexibility a quick turn around work well for prototyping, but I wouldn't want to run production with it. The paste is 3 times the cost per unit volume of
Electronics Forum | Wed Dec 06 13:47:15 EST 2000 | JAX
Nick and Dave, Did I miss the question? What does it matter what pattern the glue dots are in, whatever vision you use will have to read the individual dots anyway. If your glue machine is any good you should be able to get away with simply
Electronics Forum | Thu Jun 29 12:36:10 EDT 2000 | Gary
You might try your search with the words Adhesive Dispenser. We recently evaluated machines from Asymtek, a Nordon company, Camalot, and Zmation, and GPD. There are several others. One consideration in the scenario you described is to make sure th