Electronics Forum | Mon Oct 13 15:33:36 EDT 2014 | rgduval
So...today, we were able to get rid of the z axis not mounted error. It looks like we did so by modifying the settings in axes location (matched them to the beam 1 settings). Now, when we try to lower the nozzles, we can hear a relay or switch clic
Electronics Forum | Fri Jan 16 16:34:01 EST 2015 | rgduval
It's a four-spindle head. I've already learned the joys of the size of the nozzles...on a job that had an 0603 cap a bit too close to an SOIC. The first panel ran, and the cap placed after the IC...and I had parts everywhere. Got it figured out an
Electronics Forum | Fri Apr 01 08:13:07 EDT 2011 | mosborne1
Does anyone know a good person to get for some training and service for Universal GSM2?
Electronics Forum | Thu Mar 22 12:04:59 EDT 2012 | mosborne1
Anyone know where a good source to get Universal GSM feeders?
Electronics Forum | Thu Jan 13 15:58:50 EST 2005 | clarkk
Vikt, I'm using the LED type (leaded form). The LED is domed, but the dome is on the bottom. The surface that the nozzle picks up on is flat, and the nozzle does not extend beyond the edge of the body. The problem is in the inspection, which is rejec
Electronics Forum | Wed May 02 11:51:40 EDT 2007 | flipit
Check with Universal on service. The GSM is a solid machine. Very well built. The older machines will run under IBM OS2 OS. Nothing wrong with this OS. There have been some vision system upgrades also. The older GSM might have the AIS3500 or ne
Electronics Forum | Thu Apr 01 14:22:12 EST 1999 | Jim Boudia
| Can anyone give me information about a NCC8 (?) head for the Universal GSM's. Thats the one w/ four spindles and onboard vision (not flex jet however). Are there any maintenance issues with this style head? Is the onboard camera system accurate? Ho
Electronics Forum | Fri May 04 08:53:48 EDT 2007 | davem
I have been working with the UIC GSM platform for 6 years now in an EMS environment. Operating, programming, configuration, and line installation. I do not work for Universal or represent them in any way. UIC is a 1st rate company with excellent and
Electronics Forum | Wed Jun 23 10:05:17 EDT 2004 | exmaintenanceleader
Hi Grant, I'm ex Fuji service engineer I install also at Sagem Czecz Republik (Kladnow near Prague) in 2000 they use at new lines MPM- 2XCP643E and 1xUniversal GSM (French owen (I do not remember the exacly tipe) at second hand line they use 2x and
Electronics Forum | Wed Jun 15 22:27:40 EDT 2011 | pkamath2
Hello, My company recently installed a Positive Displacement Pump on a GSM Pick @ Place machine for dispensing chipbonder (loctite 3621) dots before mounting chip components. The head uses Universal stand nozzles (single port-small dot, dual port 0