Electronics Forum | Tue Jun 07 19:04:07 EDT 2022 | proceng1
IF the two are identical, swap the suspected bad one (#2) position 1, and see if the fuse blows before connecting the second one. Basically the same test process you describe, but swap the units first. See if the problem follows the card, or stays
Electronics Forum | Tue Nov 01 14:40:22 EDT 2022 | glasscake
Also to diagnose if it is the correct axis go to the "calisim" or the "axis position" option in utilities and get to the "current position" menu. Estop the machine and move the relevant axis by hand and see if the encoder count goes up.
Electronics Forum | Thu Aug 17 13:55:45 EDT 2023 | markhoch
I think we need more information. Is it moving at all? Does it move to a reference position and then stop before returning to the home position? Have you verified that all sensors are working correctly? Does the machine use stepper motors, motors & e
Electronics Forum | Thu Apr 14 18:28:20 EDT 2005 | darby
We use the standard supports that come with the machine. Print a 1:1 transparency of the first pass side of the pcb including mechanical outline and components. Your customer may need to supply this. Flip this over and tape it into position at th
Electronics Forum | Sun Sep 11 07:16:31 EDT 2011 | smellew
We are using Fuji CP iv-3 and keep getting > "Nozzle size alarm and Nozzle position error." I > was wondering what is wrong and how do I fix > these errors? > > Thanks > We are using Fuji CP iv-3 and keep getting > "Nozzle size alarm and Nozzl
Electronics Forum | Tue Jan 08 17:26:28 EST 2002 | davef
Our standard is: Accept and/or reject decisions must be based on applicable documentation. As an element of this, the marking on the part must identify the part positively. If the marking on the part does not identify the part positively, the ins
Electronics Forum | Thu Aug 22 04:08:17 EDT 2002 | Jason Baldwin
Symptom: Board Stuck on Print Conveyor error messages. Cause: Board not flagging the camera sensor. Remedy: Check the following items: � Check the camera sensor can see the board underneath. � Check the camera sensor calibration (in Tools, Camera Re
Electronics Forum | Wed Apr 07 11:36:41 EDT 2004 | stefwitt
Your machine will have to have a reference position. From this reference position, you determine all other machine positions. If the camera is attached to the head, you could place a glass slug and measure camera-nozzle offset, by placing the slug w
Electronics Forum | Wed Jun 16 04:14:11 EDT 2004 | loz
I have used this method as well, it did have its drawbacks though. We used to have the positioning holes etched into the stencils and this worked fine, for a while. After a couple of months of opening up and closing the fingers on the hanging rack, w
Electronics Forum | Tue Oct 26 17:25:11 EDT 2004 | davef
In every part of the dive, assume the proper position, keep toes pointed always, relax hands but keep pointed, stretch arms, make sure legs are together during takeoff and the dive, hands have to touch the top of the toes in a pike position, moving t