Electronics Forum | Tue Sep 21 11:34:10 EDT 2004 | davef
Several things to check are: * Ask Multicore if their flux res and your conformal coat are compatible. Conformal coats and NC flux res are notorious for having compatibily issues. * Conformal coat a bare board to determine if there is there is enoug
Electronics Forum | Thu Nov 30 15:18:54 EST 2000 | Rich Z
All, I have a reoccurring issue with the Alpha-Metals WS601, water-soluble paste in that the size 20 nozzle of the auger-type dispenser on my Camalot Gemini II clogs up rather frequently. Every few hours we are having to go in and clear out the nozz
Electronics Forum | Mon Nov 27 17:59:56 EST 2000 | Dave F
Sounds like "place" problem doenit? As best as I can tell [ever notice how the trail get fuzzy pretty fast, when someone starts asking probing questions], we received someone caps manufactured by someone other than Rolm through a distributor. The p
Electronics Forum | Fri Oct 02 11:59:37 EDT 1998 | jon Medernach
| I am experiencing solder paste comtaminatin of nozzels on 0603 size components resulting in missing components. The machine is failing to alarm under these circumstances. Has anybody else experienced this problem & found a solution? | Just a sugge
Electronics Forum | Sun Oct 04 08:07:53 EDT 1998 | jvo
| I am experiencing solder paste comtaminatin of nozzels on 0603 size components resulting in missing components. The machine is failing to alarm under these circumstances. Has anybody else experienced this problem & found a solution? | Check if you
Electronics Forum | Thu Apr 15 16:07:37 EDT 2004 | barry
Hi there all, we are having problems with 2 qfp devices. grainy poorly reflowed solder joints. One 100 pin .5mm pitch, and one 64 pin .5 mm pitch . Both of these devices have a thermo pad on the back of them (pad area soldered to back of device)which
Electronics Forum | Tue May 22 11:03:11 EDT 2007 | Michelle
We now have an AOI in our process after printing and have noticed that all the small aperatures are getting clogged by solder paste. Mainly on all fine pitch parts. We are using Kester ws R562 SN63/PB37 mesh -325+500 90% metal. It was manufactu
Electronics Forum | Fri Sep 05 13:33:28 EDT 2008 | jmiller
We are having problems with relay package seals cracking and moisture intrusion in power relays on thru-hole assemblies. we use a few different brands of thru-hole relays, we are using a sn-pb process right now and just going to lead-free. the contra
Electronics Forum | Wed Jan 11 14:54:36 EST 2012 | cobham1
With a large number of you out there building rigid-flex boards. I am wondering first what kind of profile do you use and what are you peak temps. I ask these questions because we are finding that our boards have a high moisture level and we are also
Electronics Forum | Fri Nov 17 09:29:27 EST 2000 | CAL
Some more information is needed. Is there a machine error indicating a mispick? Or a vision error Component missing? I am not as familiar with UIC machines as I am with Siemens but here is my $.02 anyway. Try shimming the feeder under the pick up pos