Electronics Forum | Wed Feb 06 06:14:01 EST 2019 | youngbuck
Try changing conversion board. 2 big ribbon cables plug in to it. p./n 00321189. or the 2 ribbon cables may need to be reseated. Thanks, Ryan
Electronics Forum | Wed Feb 06 07:02:31 EST 2019 | liquidspacie
We've found the problem. It was fault scale encoder. Swapping cards didn't help. Thanks everyone for the input.
Electronics Forum | Mon Feb 04 01:26:57 EST 2019 | mst3000
Hi Ry-n, we have checked the hoses for any cracks. The vaccum measuring board was changed also. Its an S20. Thanks, Steve
Electronics Forum | Tue Jan 21 18:44:00 EST 2020 | victor
Hello, Could you please help with getting the Station Computer installation manual for 4XXX and 5XXX station software versions? Cheers, Victor
Electronics Forum | Wed Jun 24 13:03:35 EDT 2020 | SMTA-Marjory
Dave, thanks for the info...my issue is the border is closed so i'm trying to find a Canadian source. If you have anything can you send it to jason.tong@apagcosyst.com thanks
Electronics Forum | Tue Jun 19 21:44:20 EDT 2007 | rfrog
The first thing that I would do is contact the smock manufacturer and ask them for advice on testing the smocks. ESD FROM A TO Z 2nd ed. (Kolyer) states that: smocks should have a resistivity of less than 10^12/sq and must not shed steel fibers.
Electronics Forum | Thu Jun 04 02:58:48 EDT 2015 | oxygensmd
I saw the same problem before we changed to S20. S15 has a problem with the components. They can fall into the head easy. Try to remove the head, clean the inner encoder and check there isn't any small component. If you work with 0402 or same/smalle
Electronics Forum | Mon Nov 27 11:29:46 EST 2000 | Ashok Dhawan
We are electronics contract manufacturers and have facility for assembly of electronic cards and equipments. I am assigned responsibility as ESD Co-ordinator and I have created control program based on EIA-625 I was referenced ESD/ANSI S20.20 standa
Electronics Forum | Mon Jul 16 15:44:27 EDT 2007 | davef
J-STD-001 doesn't necessarily require additional controls under conditions of low humidity, only that you verify the effectiveness of what you have in place. ESD S20.20 [1999] only says that relative humidity above 30% is "desirable". ESD S20.20 [200
Electronics Forum | Sat Oct 10 09:01:46 EDT 1998 | Al Carrillo
| we currently have a siplace line(80s/f) and are inhereting a fuji line from another site. I need an objective comparison between the two. What are the strengths and weaknesses of the fuji with regard to programming, operating and maintenance. any c
