Electronics Forum | Fri May 27 08:00:29 EDT 2005 | eb
Thanks for the responses. Like I said, I'm familiar with circuit cam and I already know what it can do. The problem is the pricing like some of the others have said. Have any of you used both circuit cam and any of the other softwares listed ( sony t
Electronics Forum | Thu Oct 20 12:50:11 EDT 2005 | bobl
I used to collect mine in a 50 gal drum and take them to the scrap dealer. If he classifies it as brass or copper you can get a good return. Most leads are nickel and tin plated brass. Most dealers stick a magnet on it and tell you its not worth much
Electronics Forum | Wed Nov 23 11:18:55 EST 2005 | chunks
I can remember a time when someone said... Date: August 22, 2000 08:29 PM Author: Earl Moon Subject: BS No advertising! Yes sirs! I have placed my hat, head, body, and soul into what Dave and Jax have finally said, plus the fact this forum is to
Electronics Forum | Tue Mar 20 14:03:45 EDT 2007 | stepheniii
Once I read a health and safety report complaining about "sawdust". I was confused and thought maybe Manfred had been sawing something in the back and handn't cleaned up which would have been very strange. Later Manfred came and asked if I had read
Electronics Forum | Wed Nov 26 13:31:40 EST 2008 | stepheniii
I don't know why they use it. I just know I read a TI white paper that said the problem wasn't their fault even though they knew that paladium made the parts hard to solder. And once when I started a new job one of the guys said that the owner had
Electronics Forum | Thu Jan 29 11:30:56 EST 2009 | rgduval
As others have said, you'll have some difficulties getting good reflow on pb-free out of a 3-zone oven. We did it with a 4-zone for awhile, but only had really good success on low thermal density boards. That said, you should definitely check your
Electronics Forum | Thu Mar 26 08:51:40 EDT 2009 | avalancher
Hi Sr. First suggestion is to call Mydata's phone support. With that said... Here is some ideas of what you could check: 1. Do you have power at the XWB board connector going to the motor (xxwm connector)? 2. Do you have power coming through the bl
Electronics Forum | Wed Jan 06 09:14:19 EST 2010 | jeffreyj
tpappano - Heh! Well, in the beginning there's going to be money flying INTO it... We decided the smartest thing to do was place a "help wanted" ad on craigslist for a Quad tech. One that lives in the area responded so we are going to hire him for a
Electronics Forum | Tue Feb 19 13:00:25 EST 2019 | slthomas
Everything rob said makes perfect sense. That said, do you have a robust, infallible paste management system? ;) Have you tried multiple tubes and multiple date codes of paste and had the same results? Is it stored properly (on the tip, assuming i
Electronics Forum | Fri Nov 24 11:21:06 EST 2000 | Ramon I Garcia C
HI GUYS: COULD SOMEBODY ELSE SAID ME WHERE TEST THE CONTAMINATION IN BOARDS,NOW I HAVE A PROBLEM WITH SOLDER WAVE PROCESS,THERE ISN�T FLOW ON THRU HOLE. AND I THINK MAYBE IS CONTAMINATION IN PCB. THANKS. RAMON I