Electronics Forum | Thu Jul 21 03:54:39 EDT 2005 | Rob
Never thought I'd hear myself say this (& I will punish myself later). Whatever you do, don't buy an AP25, CP4 or IP2 for starting out in low volume. 1) You will need a LOT of space 2) You will need a very good constant air supply else the AP25 wil
Electronics Forum | Wed Apr 08 14:46:34 EDT 2009 | boardhouse
The things to ask your board supplier would be: 1) Was the Pre-preg material that was used on this board within its Shelf life? and ask for the Incoming inspection CofC for the Pre-preg material. 2)Was this order shipped from Stock - this is why
Electronics Forum | Wed Nov 14 20:30:26 EST 2001 | davef
Tks. So was the answer that you got close? [ala "Car Talk"] Some guy from Cal-fornie sends me spill. I get cigars from � Yeh, I know I hog the responses, but I learn by doing this. If I can communicate in print, I can better communicate in word
Electronics Forum | Mon Oct 11 08:34:52 EDT 1999 | C.K.
Thanks for the acvice, Dave and John. Like I stated above, I didn't feel comfortable with changing wave parameters since I knew that we'd be compromising our wave quality. I'll try the peelable mask thing, reprofile, and let you guys know what i fo
Electronics Forum | Mon Feb 12 09:51:51 EST 2007 | rgduval
From what I see, you have a couple of options... 1. Hand solder the secondary side LED's. This is only a good option if you're going to be at low-ish volumes. Higher volumes tend to necessitate more automation to reduce production costs. However
Electronics Forum | Fri Mar 09 01:48:26 EST 2018 | aemery
Unfortunately Gerber EZ is probably the one thing I know very little about. As an FSE with Speedline I only had one client at that time that was using it and an application engineer came in and helped them with it. Sorry I can't give a direct answer
Electronics Forum | Thu Jul 01 10:24:31 EDT 2004 | davef
There is no specification for �Ion Chromatography for Ionic Cleanliness�. The performance of your product in your customer use environment determines the level that you select. The good part for you is that have at least one pole that you can put i
Electronics Forum | Tue Sep 21 13:12:56 EDT 1999 | Dave F
| My stencil thickness is 6 mil and we got qfp's with fine pitch. | how many percent should i reduce my stencil aperture using a 6 mil stencil for 0.5 mm pitch and 0.4 mm pitch ? | | thanks | Greg: I was going to link you to the IPC land pattern c
Electronics Forum | Tue Sep 15 19:09:36 EDT 1998 | Scott McKee
| We are a small contract assembly shop hand placing SMT. We recently received a large contract for SMD that will require placement rates of at least 6,000 CPH. I am looking at Fuji, Mydata, Quad, and Zevatech. I have little experience with automated
Electronics Forum | Fri Jun 05 07:21:17 EDT 1998 | Earl Moon
| I am currently reading as many articals as I can to familiaize myself with Surface Mount Technology. My company is planning to install a SM production line by the end of the year. | Here is one of my questions. | I have read that one of the specifi