Electronics Forum | Mon Jul 07 00:45:39 EDT 2014 | comatose
If you study how the process is done now, it isn't that different from what you describe. Instead of glue, we use solder paste, and instead of spraying it we screen print it. But not that different. For feeding boards we use conveyors instead of rubb
Electronics Forum | Thu Nov 17 21:46:48 EST 2005 | C. Kolokoy
With DIP type components, a sub-par fluxing method (foaming a no-clean), and a chip wave where one is not needed are formulas for bridging and insufficient wetting. If you have SMD's on the wave solder side of the board greater than 0603, and no SOT
Electronics Forum | Tue Jun 17 07:17:09 EDT 2003 | James
The main problem I am having is getting the Rising slope 1-3 degrees. If I slow the conveyor down then I have too long of a reflow and if I speed it up then my ramp rate is too high. I was not sure if I need my first zones at a low temp or higher t
Electronics Forum | Tue Jun 24 06:58:53 EDT 2003 | sanjeevc
Hi The temprature for the first zone should be more as the PCB entering the oven from the ambient shop floor temprature needs a higher temp.Next zone could be lower than the first zone.The ramp is a relation of conveyor speed and the temp profile.T
Electronics Forum | Mon Aug 19 13:16:15 EDT 2002 | kenbliss
Some things to consider 1. can one operator keep up with manual operations and not slow the line down? If yes, great. If no you will need a way to allow more than one operator access to the next board coming down the line to not create a bottleneck.
Electronics Forum | Mon Aug 19 19:09:43 EDT 2002 | kenbliss
Kevin You had stated "manual" so I assumed that you are looking for some better tools to actually do the work, but you wanted to keep it on the conveyor line which would require some workstation configuration to have the right tools at the operator
Electronics Forum | Mon Aug 19 11:13:18 EDT 2002 | ksfacinelli
I would like to understand what different options people are using to place low volume / odd form parts. I am very familiar with the tweezers / vacuum pen method however this can be less than desirable. I am looking into a manual pick and place to
Electronics Forum | Wed Jun 25 18:17:48 EDT 2003 | Brian W.
Water soluble pastes generally work best with a ramp-to-spike reflow profile. Check your paste manufacturer's recommended profile. There are many factors that impact your profile; board thickness, component density, buried thermal masses, board si
Electronics Forum | Sat Feb 26 13:56:22 EST 2022 | poly
I was looking to swap a Universal GC60 from 240 to 400 V 3 phase. I can get a transformer though and just looked at prices and they are quite cheap. My 2 main options at the moment: Option a: 1 Universal Genesis (2006) some feeders + essemtec ove
Electronics Forum | Mon May 12 14:49:28 EDT 2014 | davef
Hi Evtimov 'hege gave you a plausible explanation for what's going on with solder running-up the lead of your components: TOO MUCH METAL!!! I've got different one. This explanation goes along the way that you're thinking, but just opposite. The rea