Electronics Forum | Mon Sep 20 14:47:59 EDT 2010 | dman97
DEKHEAD, Thanks for the repies. I have checked and re checked both cover switches, and both are making contact. I have even stuck bypass keys into both slots and still i get nothing. When you say it is an IO error, how would I go about checking t
Electronics Forum | Thu Aug 07 15:27:57 EDT 2014 | tombstonesmt
We splice all day. We use sierra splice tool and their yellow splice. Technique that I found works very well is to peel back the cover tape of new reel over two empty slots (our machine detects when splice occurs and allows two empty slots without re
Electronics Forum | Tue Mar 17 10:06:51 EDT 2015 | chemers
Hi everyone. I hope someone or many someones can offer guidance. I have many magazines that have various problems. (Not feeding and/or not pulling tape on some slots) Does anyone have any information for repairing or troubleshooting these? It seems l
Electronics Forum | Tue Mar 17 12:48:41 EDT 2015 | cyber_wolf
Couple things: If the rubber roller that touches the take up wheels is worn you can adjust it. The axle is on an eccentric. Make sure the "teddy bear faces" that adjust the pick point are not grossly different from the left to right sides of the ma
Electronics Forum | Fri Jul 29 13:42:38 EDT 2016 | gregp
The standard you need is EIA-481B. It details the taping of components from 8mm tape up to 200mm tape including component orientations. 8, 12, 16 and 24mm tape has the sprocket holes only on one side so it is easy to determine the proper orientatio
Electronics Forum | Fri Apr 13 02:35:42 EDT 2018 | kimseo
PROBLEM SOLVED I bought a diagnostic PC card (ISA/PCI) for checking the PC of the machine... Firstly I tried ISA slot - nothing happend.. the diagnostic card didn't work... so I tried to put it into PCI slot but.... what happend ? The machine starte
Electronics Forum | Mon Apr 09 14:51:04 EDT 2018 | justconmac
UPDATE The reason for the board count in the wave when there are no boards is due to operators leaving racks with empty PCB slots. The input feed sensor is a little bit more in the center of the conveyor whereas the output feed is a slightly closer t
Electronics Forum | Thu Nov 03 11:31:51 EDT 2022 | proceng1
You described cleaning the spindles and filters, but did you clean the nozzles? Perhaps you got some paste on the nozzle. Also, did you perform the vacuum and blow off testing? Make sure your solenoids are working properly. Is it all 6 heads that
Electronics Forum | Mon Mar 13 14:23:55 EST 2000 | Boca
Dave, Hey, don't mess with the slotted wood board racks, I worked for a shop that was totally commited to dem things! The focus was; they be CHEAP! (You did get cryptic at times, I gots da same problem real often.) Boca
Electronics Forum | Mon Mar 13 14:23:55 EST 2000 | Boca
Dave, Hey, don't mess with the slotted wood board racks, I worked for a shop that was totally commited to dem things! The focus was; they be CHEAP! (You did get cryptic at times, I gots da same problem real often.) Boca
