Electronics Forum | Thu Aug 19 11:06:59 EDT 2004 | M.Enright
Are all of these parts from the same supplier? No. We have three different suppliers,AVX,Dublier and Kemet.We have had cracked capacitors from reels of each of these suppliers.
Electronics Forum | Mon Oct 25 09:32:59 EDT 2004 | bobpan
I have seen tooling cause cracked capacitors.....are the plastic standoffs compliant???? If they are not.....this could be the cause....
Electronics Forum | Tue Feb 28 16:09:27 EST 2006 | outgasser
Does anyone have any insight as to the cause of cracked chip capacitors during SMT? Z-stop? Thermal shock? Any help is appreciated.
Electronics Forum | Thu Jun 21 22:42:45 EDT 2001 | davef
We're doing one of those review things for some reason that none of us can remember. We just printed-out the product sheets on a whole pantload of SMT capacitors [rather than use the old moldy ones we have in some file cabinet ... BIG mistake] that
Electronics Forum | Wed Jun 13 17:50:06 EDT 2001 | deonn
Igmar, Have had similar problems in the past caused by different factors. The first obvious area to check is in your pick and place machine. Too much force in the Z-Direction may cause micro-cracks, which are not apparent, until the board is proces
Electronics Forum | Wed Jun 13 17:50:28 EDT 2001 | deonn
Igmar, Have had similar problems in the past caused by different factors. The first obvious area to check is in your pick and place machine. Too much force in the Z-Direction may cause micro-cracks, which are not apparent, until the board is proces
Electronics Forum | Fri Jun 15 13:06:15 EDT 2001 | CPI
I Agree with Dave, Check spec on cap some devices have temp constraints (can exceed x degrees for more than x time or can not exceed a certain ramp rate). Check that then go through the rest of the process chances are its not your machine if no other
Electronics Forum | Tue Oct 12 08:12:20 EDT 1999 | robert parker
any advice on smt resistors and capacitor that can survive an explosive shock. the ceramic smts are not, plastic ic's and discretes do fine.
Electronics Forum | Mon Aug 16 07:47:49 EDT 2004 | M.Enright
Currently we have an issue with cracked capacitors at SMT 1&2. We have seen several different types of capacitors cracked on at least three different products. We are using an "Universal 4796 HSP".This has been checked by a rep from "Universal" who c
Electronics Forum | Tue Aug 17 10:37:45 EDT 2004 | M.Enright
Some cracks are really obvious,straight down the middle of the capacitor.Some are slight hair line fractures which fail at ICT.In all cases seen,all cracks are through the centre of the cap.My worry is that there may be some which have fractures and
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, China
Phone: 0755-33578694
