Electronics Forum | Fri Oct 17 15:49:29 EDT 2008 | skumaravelu
Does any one know of digital scope that can hooked to a PC to aid the QC inspectors in inspecting the solder joints. We tried the pyroscope(http://www.theproscope.com/) and it didn't work well. Thanks
Electronics Forum | Thu Jul 15 16:07:39 EDT 1999 | Doug
| | I'm looking into vision inspection equipment to automatically inspect SMD placement and solder joint quality. Does anyone have any recommendations or know of any commonly used equipment? Do other manufacturers use vision systems at their inspec
Electronics Forum | Mon Nov 15 10:30:59 EST 1999 | Michael Vyskocil
We took Orbotech and Viscom into short-list. Both systems uses angular cameras to inspect solder joints. I'm also very interested to hear any experiences and posted the ORBOTECH vs. VISCOM message some days earlier.
Electronics Forum | Tue Oct 15 15:55:09 EDT 2013 | rway
Missing parts should be an easy fix. How many have to be inserted by hand? How do you inspect solder joints?
Electronics Forum | Mon Feb 08 06:08:50 EST 2010 | cunningham
What are people using for AOI systems and how are you using them We are on the market for 2 systems post reflow capable of inspecting solder joints at 010 sized components we have 2 old systems at the moment inspecting for presence and polarity p
Electronics Forum | Thu Jan 18 08:30:12 EST 2007 | CL,
Good Morning, We also are using Mirtec. We have a total of 5 machines now. 3 in SMT, 1 in RoHS and 1 in Through Hole. We have had incredible luck with these machines and their service is outstanding. I do not have any experiance with the other machi
Electronics Forum | Tue Jan 26 18:23:33 EST 2010 | glennster
I agree that Dage makes some excellent 3D (CAT) systems, but in our experience a high-resolution 2D system with tilt capability is usually better-suited for inspection of solder joints. Glenn Robertson Process Sciences
Electronics Forum | Thu Oct 18 10:40:27 EDT 2018 | emeto
David, you can beat around the bush interpreting criteria, but without X-ray you will not see anything. This is the way to go to inspect this solder joints properly. Criteria is 75% fillet and than you have circumference, air gaps in there....
Electronics Forum | Fri Feb 09 17:46:50 EST 2001 | raton
We've used them for several years now. They have done what they were purchased for and more. But, as time goes on, expectations of them rise, sales and marketing hype them as the ultimate cure-all of all defects, and then disappointment is experien
Electronics Forum | Mon Mar 20 16:47:13 EDT 2017 | u4bga
We're currently using no-clean flux (SR-12) in a no-clean manual soldering process. The brownish flux residue impedes direct visual inspection of the solder joints. Therefore, we're forced to clean the residue off. (1) Is there testing we can do
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936
