Electronics Forum | Mon Dec 18 23:24:50 EST 2006 | grantp
Hi, Yes, I would hate to resort to cleaning, but the product must be clean. We have been using palettes to keep most of the flux off the PCB, but there is still residue around the connectors. Does anyone suggest a good no clean flux to use with le
Electronics Forum | Sun Dec 11 22:39:36 EST 2016 | ppcbs
We have been using the Amtech line for over 12 years now with all of our PCB and BGA Rework. The NWS-4400 is mildly active and will give better results with Lead Free Solder. Note that the LF-4300 is considered a No-Clean. However it will show lea
Electronics Forum | Sun Mar 28 17:05:13 EST 1999 | Glenn Peters
I require some feed back from any one who knows about using a voc free flux in a nitrogen wave solder machine soldering both through hle and smt componants. What disadvantages are there when using this flux? Do you have any contact details with any o
Electronics Forum | Mon Jan 07 21:07:00 EST 2002 | davef
Using a flux pen sounds like a good idea. Comments are: * I assume you�re talking aqueous flux. If not, some NC flux pens leave white residues. Nearly all of 15 samples suffered to varying degrees with white residues. * Use the same flux that you
Electronics Forum | Mon Mar 29 04:00:01 EST 1999 | Vinesh Gandhi
Glenn, i am aware of one unique problem with voc free fluxes. since these fluxes have certain amountb of water content they cause sputtering leading to solder balls & voids problems. Regards Vinesh Gandhi | I require some feed back from any one
Electronics Forum | Thu Jul 29 21:12:55 EDT 2004 | davef
Use a spray fluxer, like those used in wave soldering. Search the fine SMTnet Archives for supplier names. We understand that spray fluxing is significantly different than dispensing. What do you want/expect to accomplish by dispensing liquid flux
Electronics Forum | Mon Jan 07 13:06:16 EST 2002 | mregalia
My company has been doing its hand soldering using drip bottles for application of no-clean flux. This has created quite a few problems, especially on our microwave boards. I want to convert us over to flux pens. Does anyone have any suggestions or c
Electronics Forum | Mon Dec 18 14:36:09 EST 2006 | samir
Yikes!! In-line cleaning, to clean cosmetic and benign residues (from a NO-CLEAN) flux... You sure you can't switch fluxes? Another variable with residues is the solder mask. Depending on mask type (glossy, matte, semi-gloss, or semi-matte), will
Electronics Forum | Thu Aug 20 00:16:56 EDT 2009 | padawanlinuxero
Hello I am having a problem with the flux in the wave solder, I am using a sonoflux 9000 this machine uses a air knife to spray the flux, it creates a mist that when hits the air knife pulls the mist up to the pallet where the board is, but for som
Electronics Forum | Fri Jun 01 16:22:35 EDT 2001 | davef
Your supplier�s approach to managing process change is TOTALLY UNACCEPTABLE!!!! Now, let me get the froth back in my mouth. How in the world do we know if the residues on these "no-clean" boards are compatible with your product? J-STD-001C, para 4
