Electronics Forum | Sun Jan 22 12:16:28 EST 2017 | bamproto
Dear Mr. Sang, Have you checked the pick-up position. Could the nozzle descend too much and disturb the other components in the tape?
Electronics Forum | Mon Mar 12 19:23:35 EDT 2018 | ramsus
hello you can use the specific nozzles 161 or fix the pickup on axis y: 0.20mm.
Electronics Forum | Fri Sep 17 20:42:18 EDT 2021 | tey422
The easiest way is to apply the Kapton Discs onto the SIM card connector, then select the largest nozzle that would form the good vacuum to pick up the part. The hardest part is not pickup; it's the placement. To place it correctly without misalign
Electronics Forum | Sun Mar 12 13:09:33 EST 2000 | Jeff Wilson
Jeff, The problem you are describing MAY be related to the push up pin setting on your component feeder units. Please verify that the push up pin height is set correctly for the feeder units, and the nozzle pick-up and placement heights are to the c
Electronics Forum | Sun Mar 12 13:09:33 EST 2000 | Jeff Wilson
Jeff, The problem you are describing MAY be related to the push up pin setting on your component feeder units. Please verify that the push up pin height is set correctly for the feeder units, and the nozzle pick-up and placement heights are to the c
Electronics Forum | Mon Apr 18 11:45:04 EDT 2022 | dontfeedphils
If you're 100% certain you have the correct nozzle for this package you could check to see if your PnP machine has an option for "Auto Adjust Pickup Position" or something along those lines and try changing it (if it's currently on, try turning it of
Electronics Forum | Tue Mar 01 11:11:50 EST 2005 | spot
We use SRT. We still have machines that are over 5 years old and are functioning very well in the BGA, QFP and yes CSP area. The critical part is getting the right Air nozzle for the part size. Also the software has a auto-profile feature that wor
Electronics Forum | Wed Apr 03 07:07:44 EDT 2013 | leemeyer
The manuals will not teach you how to use Autoprogram but they will be a reference once you learn it. First you must configure your system. Try this and let me know how it goes. To Configure a machine: -Under Machine Configuration Select Assembler/S
Electronics Forum | Mon Jan 13 08:35:51 EST 2020 | griinder
The holes are calibrated in MSetup. Generally, I have never had luck using the auto teach for the nozzle changer. We would teach them each manually. Before doing this, you need to narrow your issue down a bit more. Which head gives you this error?
Electronics Forum | Tue Oct 31 19:56:18 EST 2000 | Massimo
I'm reworking BGA with a "SRT Summit 2000". This machine uses a nozzle of the same size of the BGA to conduct nitrogen to the top of the BGA. When I rework big PBGAs (318PBGA, 388PBGA) I've got shorts at the corners (100% of the times!). I think the