Electronics Forum | Tue Jan 18 12:50:40 EST 2000 | Russ
Have been playing with VOC free water based fluxes, so far they appear to come clean in an aqueous cleaner, I went to perform Ionagraph testing but our machine was down so I will let you know if they pass ionics.
Electronics Forum | Mon Jul 01 20:55:00 EDT 2002 | ianchan
Hi mate, excursion = deviation? (what deviation you talking abt?) pls explain your "test vehicle"? and machine type/setting?
Electronics Forum | Thu Oct 18 17:53:31 EDT 2012 | bandjwet
We test drove several machines including the Yestech, Omron and Orbotech. For our Proto operations YesTech was about as easy to use as the rest, had adequate resolution and the right speed for the small lot sizes we are involved in.
Electronics Forum | Wed Jan 09 15:21:50 EST 2019 | dontfeedphils
Large and small levels, chalk line, plumb bob, pallet jacks, johnny bar, a 2x4 + sledge hammer, and a couple of the same PCBs to test transfer between machines.
Electronics Forum | Sat Mar 11 22:07:35 EST 2023 | recard
Hi Duro. The problem is that my VME card and ISA card was tested in another machine and both are working. So I suspect the CAN boards or Motherboard.
Electronics Forum | Tue Dec 18 08:09:32 EST 2001 | Stefan Witte
If you considering selling the machine, it will have a much lower value, if you can't demonstrate that the machine is still operational. If you don't have any jobs for the extra machine, I would study the machine performance. Write test programs and
Electronics Forum | Mon Jun 29 11:11:44 EDT 1998 | Ryan
| Mornin' everybody! | We are located in Lansing, Michigan and are looking for a company to test our wave machine solder content on a regular basis. Does anybody know of a local company that will do this? Can we do it ourselves cheaper? Thanks aga
Electronics Forum | Wed May 23 08:39:37 EDT 2012 | tony_d
Thomas, We evaluated several AOI machines and narrowed the field to two, YESTech and MIRTEC. We had an opportunity to work with both of these machines on our production floor. In our experience, the MIRTEC machine simply outperformed the competitive
Electronics Forum | Wed Jun 26 08:54:53 EDT 2002 | davef
it has a lousy gage. * Solderability testing machines from different suppliers produce dissimilar results. * Tests don�t well represent in-use. For instance, how does one test the solderability of a BGA? [Ooo, ooo. I know the answer. => For BGA and
Electronics Forum | Mon Aug 19 23:25:52 EDT 2019 | rob1
We have a Yamaha GEM and the laser will not recognise components. The laser has been changed in the past by another engineer, but this failed to rectify the problem. Can anyone advise how to test the laser or use some machine diagnostics so that I
