Electronics Forum | Thu Nov 13 05:35:50 EST 2014 | jlawson
Valor-Mentor has bardcode based verification solution with machine connection and control for most machines on market and options to connect to machines in various ways to lock system until verification process is done. Handles splicing and led binin
Electronics Forum | Thu Nov 13 05:36:37 EST 2014 | jlawson
Valor-Mentor has bardcode based verification solution with machine connection and control for most machines on market and options to connect to machines in various ways to lock system until verification process is done. Handles splicing and led binin
Electronics Forum | Wed Nov 01 12:10:20 EST 2000 | Jeff
charles, i can appreciate the hand held "reel to reel" scanner as a good solution that is very cost effective. during my smt supervision days we had a number of part loading checks. 1. load plan check, 2. scan check, 3. reel to reel manual check.
Electronics Forum | Wed Jan 27 10:00:15 EST 2010 | stepheniii
And making a form with drawings of generic parts with blanks to fill in the data can help streamline the process as well. Has anyone met anyone who trusts datasheets more than the part itself? I always figured that the machine was verifying the par
Electronics Forum | Fri Oct 23 12:41:25 EDT 2009 | stepheniii
I used Mirtec's 5 years ago. At this place we have Vi-techs. I can see why the people who recommend Vi-techs do so. They are good machines. However overall I would recommend the Mirtechs. They were faster and easier to program. And they were were a
Electronics Forum | Mon Aug 07 16:22:13 EDT 2017 | stephendo
The only people that can answer what you need is UL. At least once a year an inspector from UL stops by and makes sure the High-Pot tester is up to date on calibration and that we are following the BOM provided by the customer and approved by UL. A
Electronics Forum | Fri Mar 29 09:08:03 EST 2002 | caldon
Barcode!! The Siemens machines can have bar code Options added.On the Siemens Machines the bar code S/W is a little archaic. In theory You would have a bar code on a reel of part and a barcode on the feeder location (They are the black codes on the s
Electronics Forum | Thu Dec 14 15:05:17 EST 2017 | emeto
I am pretty sure, you are looking into the wrong spot. Your paste is too much, or your part has very inconsistent narrow leads(that includes wrong pad design as well.)
Electronics Forum | Thu Oct 07 15:15:31 EDT 1999 | Charles Morris
| | Our first article inspection after machine placement can take several hours depending on the complexity of the board. The operator visually checks the board against the drawing and bill of material. I'd be interested to hear if there are any othe
Electronics Forum | Sat Mar 30 10:50:38 EST 2002 | stefwitt
Some earlier machines with mechanical component alignment could be bought with electrical test options ( Mydata, Siemens o.a.). This is, to my knowledge, the only method to identify chip components prior placement. The downside was a high reject rat
