Electronics Forum | Thu Apr 15 14:09:48 EDT 2010 | richardli
We found stains on the boards come out of reflow oven. The board itself color changed to yellowish from white . We understand discolor soldermask due to high temperature. This can be acceptable by our customer not the stains. The stains look like wa
Electronics Forum | Fri Jun 05 10:24:56 EDT 1998 | Earl Moon
| I have just been assigned to look into the ionic chromotograhy test on our PCBA but I have zero knowledge. Could anyone help to explain what is this test about? Is it | a) a destructive test? | b) What is the measurement unit of this test? | c) Wh
Electronics Forum | Thu Apr 19 02:49:07 EDT 2007 | ray
I observed some black dot or some oxidation occured on chip termination on pcba reflowed fews weeks ago as buffer stock. The solder joint and fillet wetting is good and shinning. It is an acceptable or defect condition per IPC standard/requirement? W
Electronics Forum | Tue Nov 27 06:11:42 EST 2007 | shy
Hi Loco, my PCBA got top side and bottom side and 90% SMT and 10% THP (top side) which need to be cover by wave solder. And that's why i need to go through reflow and wave.
Electronics Forum | Sat Sep 12 09:49:38 EDT 2015 | davef
If the boards were still "wet" after DI wash, your [I assume] low res flux could be reacting with the moisture on the board and causing the white spots. The preheater in the wave could have more dryification than the preheater on the selective solde
Electronics Forum | Fri May 13 17:42:22 EDT 2016 | rogerk
hi folks, i have a manufacturing partner using an AOI machine to inspect black mask pcba, was wondering if there would be any impact on the tool. any feedbacks are much appreciated. thanks, roger
Electronics Forum | Sun Jun 07 19:09:21 EDT 1998 | Graham Naisbitt
Chiakl Ion Chromatography has been perfectly described by Dave, but here are a couple of extra considerations: Ion Chromatography will tell you precisely what is present on the surface of your board/assembly but it will not tell you whether it will b
Electronics Forum | Wed Sep 12 03:43:48 EDT 2018 | vlad_saviuk
Hello, have some problem and interesting, does any body faced with same issue. On most of our products we have NTC thermistor(like on the photo), and during assembly process and handling great amount of components cracked on PCBA so we need to replac
Electronics Forum | Fri Mar 22 10:33:58 EDT 2013 | mbrett73
Hello guys, I´m pretty new on pcba process and I´m writing to see if you can help me, we have combo process om pcb for UPS boards and we are facing a lot of shorts after wave the boards. We did few tests with different fluxes different profiles chan
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411