Electronics Forum | Fri Apr 08 17:31:44 EDT 2022 | stephendo
I don't know if they make a shrink tube cutting machines, but Schleuniger makes a good wire cutting/stripping machine.
Electronics Forum | Wed Oct 26 22:31:48 EDT 2022 | sarason
Broken wire connecting to the encoder on your servo, or anyware else in the feedback loop?, bent up encoder? sarason
Electronics Forum | Wed Oct 26 22:32:26 EDT 2022 | sarason
Broken wire connecting to the encoder on your servo, or anyware else in the feedback loop?, bent up encoder? sarason
Electronics Forum | Tue Nov 01 16:09:38 EDT 2022 | kamedatec
The machine had the Auto Tray installed but was removed to put here in the company because the machine was bigger than my elevator. The owner told me it was working, which made me waste time testing all possible settings, electronic cards and cables.
Electronics Forum | Thu Mar 02 20:39:42 EST 2023 | markhoch
If you're using a good quality nozzle, you can clean the oxidation off with a wire brush and an emery cloth. Just make sure you re-tin it very well before you use it.
Electronics Forum | Wed May 03 13:27:32 EDT 2023 | dilogic
Genesis should work with pneumatic feeders, but not if Lightning heads are used. It's basically 24V transformer and some wires and fuses - you can do this "upgrade" by yourself, actually. Regarding cal. kit - it's the same as for GSM's but, again, no
Electronics Forum | Sat May 06 00:51:02 EDT 2023 | frankchan
Supposedly yes, but without detailed instructions we are risking connecting the wrong wire and toast it.
Electronics Forum | Tue Oct 24 19:09:12 EDT 2023 | sarason
Possibly blocked air lines did you check air pressure? Also drivers on the relevant boards. or simply damage in the flexible wiring harness( a nightmare) sarason
Electronics Forum | Thu Apr 04 18:42:19 EDT 2024 | proceng1
Unfortunately, I had 4 machines, and they all had slightly different component layouts. However, the fuses are usually behind the geckos (toward the front of the machine) just on the other side of the wire tracks. Probably a Terminal Black type wit
Electronics Forum | Mon Apr 15 17:11:48 EDT 2024 | proceng1
Thermal switch? I only recall our pots having 4 heating elements wired together to a plug.
