Electronics Forum: iron (Page 67 of 71)

Equipments required for making SMD PCB's

Electronics Forum | Sat Jun 27 00:23:26 EDT 2009 | grantp

Hi, This is easy. If your just doing prototypes, then you could get by with a syringe of solder paste and a hear gun. You can put down a little solder paste on each page and then place the passives and heat gun the board. If you have other active p

Need low cost pick and place machine for limited production

Electronics Forum | Tue Aug 11 17:36:44 EDT 2009 | dyoungquist

You are looking for a complete SMT assembly line plus possible X-Ray inspection and rework equipment. The 3 components of the SMT line are stencil printer, pick-n-place machine and reflow oven. How small are your components? 0603? 0402? What is the

Assemby of flexible printed circuits

Electronics Forum | Wed May 16 15:40:56 EDT 2012 | davef

Here's some notes from a Bob Willis presentation Assembly of Flexible Circuits with Lead-Free Solder Alloy [Bob Willis leadfreesoldering.com] * Flexible Circuit Construction ** Base Material - 0.05mm Copper 18/18 um ESPANEX from Holders Technologies

through hole questions

Electronics Forum | Wed Nov 19 15:16:47 EST 2014 | warwolf

Interesting, see we used to do a large amount of PTH but we have been able to convert most of those parts to SMT now. the majority of our PTH is connectors. I am doing some research as to the types of through hole assembly that still remain.- This d

Best Jet Printer? MY600?

Electronics Forum | Mon Feb 01 09:17:45 EST 2016 | spoiltforchoice

You can buy an awful lot of stencils for $200K > but where/how are you going to store all of those > stencils? There is a certain $$$ value to all > the space it will take to store them. > > I have > been told by a Mycronic salesman that they a

Solder Iron Tips - Acceptable Temp Tolerance?

Electronics Forum | Sun Sep 02 09:06:42 EDT 2018 | davef

Cold resistance between the tip of the tool and the ground reference, tip current leakage, and tip voltage. per ANSI ESD STM 13.1 J-STD-001 Rev G, Appendix “A” Guidelines for Soldering Tools and Equipment: A-2 BENCHTOP AND HAND SOLDERING SYSTEMS Se

Re: Micropax Connector Repair (Through Hole Version)

Electronics Forum | Fri Aug 13 11:21:15 EDT 1999 | Earl Moon

Ladies and Gentlemen, As a newly appointed DFM/CE "guru" here, one of my responsibilities has become repair (of course). As I have some knowledge of BGA repair/rework using semi-automated equipment, it naturally follows I would hav treme

Re: Micropax Connector Repair (Through Hole Version)

Electronics Forum | Tue Aug 17 10:32:19 EDT 1999 | Boca

Ladies and Gentlemen, As a newly appointed DFM/CE "guru" here, one of my responsibilities has become repair (of course). As I have some knowledge of BGA repair/rework using semi-automated equipment, it naturally follows I wou

Re: Micropax Connector Repair (Through Hole Version)

Electronics Forum | Tue Aug 17 10:35:52 EDT 1999 | Boca

Ladies and Gentlemen, As a newly appointed DFM/CE "guru" here, one of my responsibilities has become repair (of course). As I have some knowledge of BGA repair/rework using semi-automated equipment, it naturally follows

Re: Micropax Connector Repair (Through Hole Version)

Electronics Forum | Tue Aug 17 10:48:16 EDT 1999 | Earl Moon

Ladies and Gentlemen, As a newly appointed DFM/CE "guru" here, one of my responsibilities has become repair (of course). As I have some knowledge of BGA repair/rework using semi-automated equipment, it naturally f


iron searches for Companies, Equipment, Machines, Suppliers & Information