Electronics Forum | Thu Jul 15 10:28:49 EDT 1999 | Boca
| I'm looking into vision inspection equipment to automatically inspect SMD placement and solder joint quality. Does anyone have any recommendations or know of any commonly used equipment? Do other manufacturers use vision systems at their inspecti
Electronics Forum | Fri Jul 16 05:24:40 EDT 1999 | Chris May
| I'm looking into vision inspection equipment to automatically inspect SMD placement and solder joint quality. Does anyone have any recommendations or know of any commonly used equipment? Do other manufacturers use vision systems at their inspecti
Electronics Forum | Tue Mar 19 15:38:48 EST 2002 | stefwitt
For a few thousend boards, I would look into some automation. In order to get the components off the boards you could run the boards through the reflow oven with the cooling fans turned off. When the boards come out of the oven the solder is still l
Electronics Forum | Mon Jan 13 17:39:49 EST 2020 | avillaro2020
Hi, I need help on how to address the solder wicking on the samtec searay connector after reflow resulting to open solder joints on thick and thermal heavy PCB (4.4mm and 6.3mm). I increased my solder paste thickness to 8 mils, the connector is manua
Electronics Forum | Sat Sep 10 17:12:18 EDT 2022 | yannick_herzog
Hello, we use an oven to dry our MSL components after the floor lifes expires. The oven works at 40°C / 0.1% RH. The plan is to upgrade the oven from 40°C to 60°C to shorten the duration of the process. I have found a number of articles mentioning
Electronics Forum | Thu Apr 12 00:43:38 EDT 2001 | zam_bri
Can anybody gimme some input on the problem I faced currently on 0402 Chip Resistor. At pre-reflow the component are placed nicely but at post reflow, we found the Resistor stands sideway ( both termination, the pad and componant are in contact, fun
Electronics Forum | Thu Apr 12 01:23:04 EDT 2001 | Eric C
Check the pad size. I had this issue before due to the pad size too wide. R&D had change the size of the pad and is solve the issue. Before the pad size change, I had rebuild another stencil with the pad opening close to the component size. It won't
Electronics Forum | Thu Apr 26 07:16:38 EDT 2001 | wbu
Dave, nice movie !! Seems you�re expanding your already great services. It would be interesting what conditions lead to this phenomenon. To me it seems that one ball is blown up by voids extremely. Can you tell more about it ? Hope to see you at
Electronics Forum | Fri Sep 07 13:44:23 EDT 2001 | Hussman
Wut-chuw talkin' 'bout Carol? Are you talking about an aqueous wash machine to clean your boards? Well then, I've always liked Electroverts machines. They're modular and seem to do the job well. It all depends on your boards and your process.
Electronics Forum | Fri Sep 07 16:29:52 EDT 2001 | mparker
That would be the elusive typo, check your keyboard, the "A" is right next to the "S". I believe she meant "SMT" boards. Wazzup Dave, your grey matter already shifted into weekend mode? Hoist a pint of Sierra Nevada, if you get that spill in your ne