Electronics Forum | Fri Sep 10 14:21:39 EDT 2021 | majdi4
Evtimov , i agree with Thomas.. you don't have to take your mesure in the middle of the stencil since the sheet of the stencil has the same thickness everywhere either in the corners or in the middle.. So you can ask from your stencil supplier to mak
Electronics Forum | Tue Feb 20 14:00:50 EST 2001 | billschreiber
Hi Dave, It sounds like you haven�t been shopping for stencil cleaners in awhile. Ultrasonic stencil cleaners start at $12,900, evaporators start at $6,800 and 440-R SMT Detergent is $19.00 per gallon. For $19,719.00 you get everything you need to
Electronics Forum | Mon Oct 02 11:20:44 EDT 2000 | aaronho
It's not really you need a book. You can ask your stencil supplier for what to... The supplier should be an expert in stencil making. Basically pitches and apertures should be made to the spec in CAD data of PCB. You can ask to make to 90% size of pa
Electronics Forum | Thu Oct 08 22:20:44 EDT 1998 | Dave F
| | | I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the rema
Electronics Forum | Fri Oct 09 04:08:45 EDT 1998 | Thomas Blesinger
| | | | I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the re
Electronics Forum | Wed Mar 18 22:26:06 EST 1998 | Aaron C. Wedemeyer
Introducing flat rate pricing to SMT Solder Paste Stencil repair. 15 x 15 or smaller = $125 - Larger stencils will be repaired for only $150 + shipping and handling. Visit our site today for a free cost comparison - We will prepare an analysis sho
Electronics Forum | Sun Mar 01 13:18:42 EST 1998 | Sam Sangani
Are you using Stencils to apply solder Paste for your surface mount PC board ? If so, please visit our web page http://www.pnconline.com/stencil.htm We make Laser Cut stencil with Re-Usable ACCUFRAME at lowest cost in the SMT industries. We also wil
Electronics Forum | Tue Jul 12 20:03:13 EDT 2005 | Tom
Most Lead Free Solder suppliers are saying that stencil aperatures should go to 1:1 or have no change from previous stencils design. Only one solder supplier seems to be complicating the process....is their solder very different?? Can anyone share st
Electronics Forum | Fri Mar 16 07:22:50 EDT 2007 | cyber_wolf
I am not sure what the smallest aperture is that I have. I can tell you that I remember the area and aspect ratio (for apertures) being quite a bit lower than standard on quite a few stencils. We only order Invar on stencils that fall below ratio..
Electronics Forum | Fri Jan 26 15:54:04 EST 2024 | travishemen
We use a Brady printer BMP21-Plus and M21-500-595-WT 1/2 inch wide labels on our stencils for stencil name and storage rack location. They have survived hundreds of washes through our ultrasonic stencil wash with chemistry. We have never had one fa