Electronics Forum | Thu Jul 30 16:50:41 EDT 2015 | lokit
In our production line we use the pick and placer My100 by Mycronics. We get a lot of feedback from quality department about IC's being placed upside down, wrong polarity. (Wrong polarity usually already delivered to us, or IC's placed in the sticks
Electronics Forum | Mon Feb 08 15:54:22 EST 2021 | bobpan
I think in the machine configuration there is an option to use the vacuum or not. Its been a long time but i think you just just skip past the vac message if it pops up. Pust both left buttons at the same (under the display) time to get into the mach
Electronics Forum | Tue Feb 09 10:01:08 EST 2021 | bobpan
1. The resistor is normally hot. 2. If the machine is crashing towards the front then the system settings need reset. Do this by pressing and releasing the e stop then pressing both front left buttons on the mylar below the lcd screen. Go into the ma
Electronics Forum | Thu Mar 04 14:55:48 EST 2021 | mendez
Thanks a lot! I sent the boards to REPRINT in UK, and I'm waiting to get them deliver to do the final testing. Are these printers very reliable? I heard that if you have the stencil cleaner (my has) to avoid using it since it was a bad design and bu
Electronics Forum | Thu Mar 04 15:11:45 EST 2021 | mendez
Thats good to hear. I have (1) extra boards for the LCD and the Motion drivers in case something gets damaged later because as you mentioned; parts are very difficult to find (or super expensive) I did soldered the IC chip on the LCD unit and get RE
Electronics Forum | Fri Dec 02 19:19:21 EST 2022 | zsoden
Hi, I've picked up a used Yamaha YG100 but it was without any manuals. I do have a YG88 user manual for reference but it would be preferable to have the YG100 manuals too. Is anybody able to provide a copy? I'd also love to get my hands on service
Electronics Forum | Wed Apr 21 14:23:06 EDT 1999 | B.K.
| | What is a Quad 100 with vision and glue dispenser worth these days? | | | JJ: It's similar, but not the same ... A friend bought a Quad 100, vision, couple of 8mm feeders, and 13 vib bases w/platforms for $5k last month. I told him, "even if y
Electronics Forum | Wed Apr 26 02:16:18 EDT 2006 | AR
We had x-ray and optical microscopy analyses done on transformers dip soldered with Sn/Pb, SN100C3 and SN100C4 alloys using temperatures 400�C ... 450 �C, with dip times of 2..4 seconds. We found that SN100C4 is at least as good as Sn/Pb 62/38 and SN
Electronics Forum | Thu Jan 19 23:29:29 EST 2006 | theSaint
I've seen many comments in many threads about the positive attributes of SN100C (apparently mostly by salesmen). However, I have a concern for the higher temps that will be encountered when using SN100C (or Sn/Cu) vs. SAC305 (vs. 63/37), specifica
Electronics Forum | Fri May 12 13:56:37 EDT 2006 | timnop
Steve, Thank you very much for your reply. What I really need to know now is how you discovered these issues. Did you run this product in your wave solder machine, and for how long? Are you now using SN100c instead? Please mention the other issues if