Electronics Forum | Mon Jan 31 12:15:32 EST 2000 | Neil
I am looking for a Mydata users group, one possibly located in the Chicago area. If such a group does not exist, I would be more than happy to help start one. I have an older Mydata TP9 (non-UNIX) machine, with weak (yet expensive) support from the m
Electronics Forum | Thu Mar 15 17:34:38 EST 2001 | rentreo
I place 0302's on my Quad 4c's all the time. Use a repeat pick-up just like a waffle tray part but make sure the z height is perfect on your pick-up or you will bounce the other parts out of their pockets. Also change your mod code to only try once o
Electronics Forum | Wed Aug 25 14:53:10 EDT 2004 | smokejumper
TM8 Magazines step 4mm min. You need a TM8FC or Agilis. You can make a tray and pick from strips of tape too.
Electronics Forum | Wed Aug 25 22:55:59 EDT 2004 | pdeuel
We started placing 0402 with regular feeders and wasted every other part untill we got the correct feeders. The cost for most parts runs less than 1/20 th of a cent. Reels come in quanities of 10,000 instead of 5,000. You will also need the correct t
Electronics Forum | Fri Oct 29 07:10:40 EDT 2010 | scottp
I agree with DucHoang. If your board and reflow profile have not changed then I would suspect incoming parts. We've seen tombstones when a chip supplier had plating problems.
Electronics Forum | Thu Oct 28 10:06:12 EDT 2010 | d0min0
We saw this idea in older posts, but - we don't want tombstone elsewhere :) - rotating the boards before oven is complicated, so it could give more problems than the tombstoneing :) the issue is not 100%, it is 10 to 50 boards with component up per 3
Electronics Forum | Fri Dec 15 05:02:42 EST 2000 | SaiWong
It is not gonna work. Even though you fine tuned the CP3. 0603 is the maximum. The camera design is only for the 0603 maximum. If you use it for 0402. I think at least 60% of the component are gone. Also, there is no 0802 feeder for the CP3. How can
Electronics Forum | Wed May 09 13:11:22 EDT 2001 | zam_bri
Hi.. Recently, I have received a few reels of 0402 with an old date code ( but still less than 2 years old).I don't have a capability in-house to carry out the solderability test except for the dipping test ( dip the components in the molten solder
Electronics Forum | Thu May 10 09:57:22 EDT 2001 | zam_bri
Hi Cal/Dave F, Good news today. The problem went away when I received and ran with a brand new component today. But I'm sure with a robust profile, I should be able to compensate oxidations at some degrees, rite? ( taking into consideration the suc
Electronics Forum | Thu Jun 04 09:40:38 EDT 2020 | kasia
Hi everyone, Im currently working on little bit old SMT machines (Europlacer) and I have problem with nozzles , everytime when I want to run a program I got information "26 nozzle not picked or error of detection". I restarted machine, checked the