169 3d inspection results

Electronics Forum: 3d inspection (Page 8 of 17)

Inline printer experience

Electronics Forum | Mon May 13 08:31:48 EDT 2019 | robl

Do you have in line 3D Solder Paste Inspection machines? If not the 2D inspection on the SP710 is very slow & not a patch on Hawkeye from DEK. If print time is not an issue then it doesn't matter. I have had both types of machine, and personally pre

Automatic Paste Inspection worth it?

Electronics Forum | Fri Mar 21 12:39:52 EDT 2008 | stevea

Paste Inspection is critical to the overall printing process. There are at least 40 variables to this process. The idea of using only 2D printer inspection or worse yet, 3D (marginal at best) printer inspection demonstrates a serious gap in coverin

CCGA

Electronics Forum | Mon Apr 04 18:23:35 EDT 2005 | GS

Solder volumes is very important parameter to keep under control in order to get a good and reliable CCGA solder joint, and an automatic 3D paste volume inspection is strongly recommended practice to use. Questions: - what Column pitch do your CCGA h

3D Vision vs 2D vision

Electronics Forum | Thu Jul 12 13:37:18 EDT 2001 | markc

I can't comment on the quality of any vendors equipment, but your question is really a "process approach" issue. What do you expect to find with that 3rd dimensional measurement? 2D inspection should detect the majority of your printing errors.

Screen Printing Print Validation

Electronics Forum | Tue Nov 01 19:53:23 EST 2005 | KEN

Um...for you mylar guys....esd safe? Why worry about the first two prints. Worry if they power up or not when sent to funcitonal test. Zapp! I think I know where this is comming from. It is not that uncommon to have a sacrificial print. However,

Accuracy Requirements for New Technology

Electronics Forum | Mon Apr 11 05:44:27 EDT 2005 | Rob

You'll struggle to find low end machines that accurately and reliably place 0201's (despite some of the manufacturers claims). You'll also obviously need to place the larger components on the same platform, accurately which will really cost you.

AOI for defect detection at soldering process

Electronics Forum | Wed Aug 30 07:34:23 EDT 2006 | Xray Tester

For Automated x-ray inpsection system comes in 2D and 3D. 2D also know as the transmission xray inspection where xray are generated from a fixed point source. On double side board, this does not work that well. That where 3D Automated x-ray inpsectio

A.O.I - Design - Brainstorm

Electronics Forum | Wed May 11 08:41:46 EDT 2005 | Rob.

Cheers Jerry, forgot the most important one! Also want it to do: laser 3D volumetric solderpaste inspection Pre-reflow (including fault logging by placement machine & individual feeder) Post reflow solder joint inspection & handle lead free joints

Which AOI method is best?

Electronics Forum | Mon May 07 09:46:15 EDT 2001 | orbotech

3D imaging refers to the acquisition of images from multiple perspectives using, preferably, multiple sources of illumination, while 2D imaging refers to the acquisition of an image from one perspective. An AOI system with 3D imaging is able to acq

Can anyone tell me that between Mirtek & Kohyoung which AOI machine will be better and why?

Electronics Forum | Mon Feb 16 12:33:58 EST 2015 | ianatvadatech

Hey Syed, I've been running the MV-9 for just over a year. We shopped around very extensively (two APEX shows) before switching from yestech to mirtec and we bought two of the best systems they had to cover the four lines we run. Two systems are fa