Electronics Forum | Tue Jun 26 21:41:10 EDT 2007 | davef
4.4 Determine the amount of flux on the board. 4.4.1 Get a piece of corrugated cardboard and a weighing scale accurate to 0.01 grams. NOTE: Use cardboard with alcohol fluxes to slow their evaporation and get good data. 4.4.2 Weigh the cardboard. 4.4
Electronics Forum | Thu Jun 10 22:09:56 EDT 1999 | Dean
CP4-3 AND IP3 | >CP4-3 AND IP2 | >CP4-3 AND IP3 | >CP4-3 AND IP2 | >CP3 AND IP2 | >CP3 AND IP2 | Question: | Looking for anyone who has this type of mix, equipment and what is your OEE and how do you come up with the numbers. | | I use Unicam Line m
Electronics Forum | Wed Sep 08 16:00:09 EDT 1999 | Mark D.
My company is looking to perform "real time" statistical process control on our current SMT operations. I have identified the critical processes for SPC but have not had much luck in finding a system(s) that can monitor the required processes for my
Electronics Forum | Thu Jan 10 06:52:51 EST 2002 | Dreamsniper
I'm using Kic Profiler and aluminium tape from Kic and thermocouples from Kic. They are good and reliable. I even manage to modify my heller 1088 by adjusting the fix conveyor and re-baffling the oven. Had dropped my 20-22 deg. C delta T down to 4.3
Electronics Forum | Thu Aug 04 03:56:38 EDT 2005 | Rob
Hi Danny, I do remember you recently suggested to a customer who was new to surface mount & wanted low volume the following equipment that you were selling: 1. MPM AP25 2. CP4 3. IP2 http://www.smtnet.com/Forums/index.cfm?fuseaction=view_thread&CF
Electronics Forum | Fri Feb 17 16:46:29 EST 2006 | GS
Hi CW, mine is not the answer to your questions, but I suggest you to take a look of the latest level of J-STD-033B (October 2005) The J-STD-033A was from July-2002, and several important points are different from latest level. For instance, in Cha
Electronics Forum | Fri Feb 17 16:50:58 EST 2006 | GS
Hi CW, mine is not the answer to your questions, but I suggest you to take a look of the latest level of J-STD-033B (October 2005) The J-STD-033A was from July-2002, and several important points are different from latest level.For instance, J-
Electronics Forum | Fri Aug 15 00:51:30 EDT 2008 | boardhouse
Hi Paul, My discloser, I sell for an offshore house, this is Crap.... Section 3.4.3 Annular Ring (External) of IPC-6012A, which also calls out Table 3-5, states that "Plated-through holes identified as vias can have up to 90 degrees breakout of t
Electronics Forum | Tue Sep 09 09:04:17 EDT 2008 | davef
Oh that's GREAT. Now, we're encouraging engineers blow to saliva on boards. The saliva is made 99.5 percent of water and 0.5 percent of dissolved inorganic compounds. One third of the 0.5 percent are dissolved metal-ions such as Ca2+, Na+, K+, Cl- a
Electronics Forum | Thu Dec 20 12:14:37 EST 2012 | dhopps
If you go with MCS I would recommend using an MCS30. You would have to make sure that the E-Proms for host communication are installed in the MCS and the host module (software)as well. You would then need CadConvert to program and transfer programs
