Electronics Forum | Wed Jan 12 04:39:28 EST 2011 | muarty
Hi Vijai, You didn't say if you were running Tin/Lead or Lead Free. For lead free soldering I would suggest that you try to achieve as close to 7deg conveyor angle as you can. John
Electronics Forum | Tue Mar 08 19:37:17 EST 2011 | Jacki
Hi We did some evaluation to solder 0.4mm pitch by Wave. We found that there were many solder shorts at Sockets pins so it made touch up time longer. Please advise me someone has achieved the fine pitch soldering by wave. Thanks in advance.
Electronics Forum | Wed Jun 22 06:41:16 EDT 2011 | mbnetto
Dean, Do you have some equipment from this brand? If you have, do know the necessary time to achieve the humidity below 5%when doors open and close? Thanks
Electronics Forum | Thu Jun 23 07:30:04 EDT 2011 | SBecmpe
That is a very interesting concept. It sounds very time sensitive and would require some specialized equipment to achieve consistant results. Unfortunately I don't have any experience welding anything that thin. If you ever figure it out I would be i
Electronics Forum | Thu Jul 18 16:05:54 EDT 2013 | justinlevine24
Hi Eric, what specifically are you looking to achieve with the 5DX? I can narrow it down for you better if i know what exactly you are going to be using the tool for.
Electronics Forum | Mon Mar 17 10:26:36 EDT 2014 | cwwong1
Pls share with me the time cycle result for the THM component on board thickness 93 mils, I would understand the risk for not having to achieve soler barrel fill less then 50%.
Electronics Forum | Thu Jun 12 00:20:41 EDT 2014 | jasmine01
How to limt my Cisco WS-C3560X-48T-S switch port to 128kb which running 12.2(55)SE3 ? Could anyone help with the IOS commands needed to achieve this ?
Electronics Forum | Thu Jun 12 00:27:29 EDT 2014 | jasmine01
How to limt my Cisco WS-C3560X-48T-S switch port to 128kb which running 12.2(55)SE3 ? Could anyone help with the IOS commands needed to achieve this ?
Electronics Forum | Wed Aug 27 14:52:33 EDT 2014 | jana
Thank you for your reply. YES, optical alignment system allows two pictures to be viewed simultaneously but it can be achieved more ways. Do you know what method is used in the superior machines e.g.in Shuttlestar machines?
Electronics Forum | Mon Jun 29 07:17:25 EDT 2015 | donlockard
Seho maxi wave 3240 should be considered as well. Invented full tunnel nitrogen systems that have lower operating costs and provide yields unlike what can be achieved by air wave systems.
