Electronics Forum | Thu Jun 07 05:11:42 EDT 2012 | cp38260
Hi, I have pcbs (Duroid/RT 5880) with raw copper, soldered in vapour-phase chamber at 230 degrees Celsius. During soldering, copper gets tarnished. Cleaning with Vigon A250 removes the tarnished layer. Indeed, in the VigonA250 techn. datasheet it is
Electronics Forum | Thu Oct 15 11:07:23 EDT 2015 | aj
You should do a bit of research into Mirae Placement machines.. they took over the Quad machines and built on them so your feeders may still be compatible... I only know this because I spoke to an agent last week - I have never used quad or Mirae..
Electronics Forum | Sat Oct 23 08:16:32 EDT 2021 | smtconnie
Sorry to hear your story. We are professional SMT line machine manufacturer in GuangDong China.(ICT International Group). We provide oversea service for many country clients. We have many agent in different country. We also put advertisement in thi
Electronics Forum | Thu Feb 03 13:18:03 EST 2022 | davidwallis
Hi All. I have one of these, which was bought secondhand and has never been commissioned. Does anyone out there know of a UK agent who services these, or can help with any advice regarding spares, operation characteristics etc? Thanks in advance.
Electronics Forum | Tue May 26 19:20:39 EDT 1998 | Graham Naisbitt
Ryan, Please consider the following: There is no such thing as no residue flux. Low or no solids flux contain "wetting" agents to help the stuff stick upside down! Try painting your ceiling with less than 2% solids paint!! With all this excess liquid
Electronics Forum | Wed Jul 05 22:29:06 EDT 2000 | George
Matt, I suppose the automated system you refer to is the VPD-101 camera system that captures component image and with a few clicks on the mouse you are able to define all the element data and dimensions of that part. Check with your local Fuji agent,
Electronics Forum | Thu Jun 01 21:54:00 EDT 2000 | Dave F
Jeremy: Standards: � A-600 talks about percentage of solder mask loss allowed, according to the location (eg, laminate, bare copper, gold or nickel, melting metals) and equipment class. � A-610 talks to "Solder Resist Coating - Voids & Blisters" by
Electronics Forum | Mon Apr 03 01:17:37 EDT 2000 | cpgoh
I ever thot of changing the whole solder pot altogether but then it prove to be a costly measures.. If looking at the source of the problem, it might be mainly due to the way that the machine had been maintain... Anyone care to share how they are per
Electronics Forum | Fri Feb 04 09:23:21 EST 2000 | Casimir Budzinski
If No-Clean flux does not need to be cleaned, then why do I get readings of up to 27(ug NaCl/sq in) on boards that are not washed, up to 23.4(ug NaCl/sq in) on boards washed with DI water only and from 1.2 to 10.1(ug NaCl/sq in) on boards washed with
Electronics Forum | Fri Jun 04 19:10:46 EDT 1999 | Ed R
Jason, Are you aware that this UIC machine is a Sanyo 60 series HSP. You can contact NSA(US agent of Sanyo) in Irving, TX for service info. I don't know if UIC is supporting the 60 series any longer. Their phone number is 972-831-9700. Hope this h