Electronics Forum | Wed May 25 17:58:07 EDT 2011 | rssimmons
The SimmScope is a first article inspection system that uses an overhead digital microsope on a motorized gantry to inspect the board - much like an AOI - except that it does not automatically make the pass/fail decisions. It is up to the operator to
Electronics Forum | Thu Jun 10 10:48:49 EDT 2004 | Jon W.
Dr. Lou, Your first question is influenced by many variables. New equipment will have the first year free parts, labor and service. You may discuss a long term at time of purchase. Older equipment may (depending on maintenance) have a higher chance
Electronics Forum | Fri May 15 21:39:48 EDT 2015 | jlawson
Reflow.. 1.Rehm (Germany) - Best in Class Best overall process stability heating system ( Alot of makers have started to copy there VX heating arrangement ). COnveyor chains can be a bit more attention in terms of maintenance on rehm , but if foll
Electronics Forum | Thu Jun 06 21:50:27 EDT 2002 | ianchan
Hi Mates, Here's another boggle question : does anyone know how to measure the work environment "Factory Lighting"? what is the measuring equipment to use? what is the specifications-range to measure factory Lighting? Thanks for your help.
Electronics Forum | Fri Sep 25 13:09:42 EDT 2009 | rmitchell
Thanks to those that responded. I eliminated the light curtain problem. The metal plate the light curtain pcb bolts to was bent. I had it aligned in our machine shop and it worked properly. I forgot to mention the error was pooping up with no fee
Electronics Forum | Wed Aug 03 12:18:49 EDT 2016 | dekhead
You don't say what kind of printers you are running, but if you had multiple light sources and independent control of direct an oblique lighting (either manual and software controlled) usually pretty "do-able". I have customer doing almost exclusivel
Electronics Forum | Tue Feb 27 12:43:43 EST 2001 | gsmguru
I've used an on-axis camera lighting for other components with a good deal of success. (But not for CGA's in particular) I would think it should work pretty well for a CGA application. I've done some pretty odd looking parts with this type of lightin
Electronics Forum | Tue Sep 22 16:39:10 EDT 2009 | rmitchell
Hi, We are getting a E-Hydra-1 Frame grabbing failed on caps and resistors and also a Light Curtain trigger X wagon. I spoke with mydata and they indicated the light curtain might be getting set off and causing the frame grabbing failure. I cleane
Electronics Forum | Wed Sep 23 08:19:52 EDT 2009 | rgduval
Check to see if there's a loose cable, or something, that's randomly setting off the light curtain. We occasionally have that problem with some of our flex or 12/16 mags in our TP9, where the tape take up clip is loose (nothing in that feeder) and i
Electronics Forum | Fri Jun 07 10:49:35 EDT 2002 | slthomas
This might be a good place to start...I'll let you read it and tell us how helpful it was. ;) http://www.nesllc.com/acrobat/LightingFund.pdf
.gif)
