Electronics Forum | Sat May 06 23:44:24 EDT 2006 | mika
We get away with edge clearance of 5 mm on the bottom side and 3 mm on the top side. This is mainly because of our BTU-reflow ovens. The rest of our assy-line can handle 3 mm edge clearence. Assuming that a double sided pcba is running secondary sid
Electronics Forum | Mon Sep 24 07:38:01 EDT 2007 | chrispy1963
I never saw in any post if your machine uses the camera to find the board edge or if your machine uses the bottom front rail mounted board stop sensor. Also is this with only one particular job you run on this machine or is this happening with ALL
Electronics Forum | Sun Apr 12 10:44:44 EDT 2015 | proy
I have a small PCB which has gold finger edge connector along one side. This limits the PCB fabricator panelization due to the bevel required on the edge connector Does anyone know of a simple process to add the bevel AFTER the boards are assembled a
Electronics Forum | Tue Nov 30 12:02:02 EST 1999 | Steve
Hello All, We assemble boards which are small in size. We use nests for support when screen printing the boards. The nest gives support along the edges of the board. However we are bringing in a new product which has components very close to one edg
Electronics Forum | Thu Apr 20 14:37:29 EDT 2006 | Chunks
The newer MPMs use the camera to find the board edge - no mechanical stops like AP and DEKs.
Electronics Forum | Thu Aug 02 07:57:59 EDT 2007 | hussman
It really depends on how thick the board is. 0.063" and you guys would be right.
Electronics Forum | Tue Sep 24 14:38:53 EDT 2002 | Jim M.
The EMS company i work for assembles a small PCB board that requires 10 solid press fit pins installed. The pins are Phosphor Bronze, CDA-510 Alloy, Grade A, 3/4 hard with a finish of .00012 min tin/lead over .00005 min nickel.I would like these pla
Electronics Forum | Wed Jun 25 11:24:20 EDT 2008 | namruht
I do not have a lot of specs at the moment. I just wanted to get some opinions and some of you thinking. I will get some part specs and add to this post later. WE are running a pretty big PCB and ther are some connectors on the edge of the board. T
Electronics Forum | Wed Oct 26 22:39:01 EDT 2022 | sarason
This is not really a bug. The logic is this if you place a component beyond the edge of the board, it should falloff! So instead on having a very complex algorithm to work out component centres and then make a judgement as to whether the connector is
Electronics Forum | Thu Feb 22 20:17:34 EST 2007 | dekhead
My guess from your description is that you're talking about the board at stop sensor (mounted on camera) that is seeing the board, but the board edge is not hitting the stopper. Either the board stop is not extending fully, or the board is sagging an
