Electronics Forum | Thu Feb 18 11:37:25 EST 2010 | dcell_1t
thanks for your replies, I will check about oven integrity (calibration) and any exhaust issue... as fas as I know there's not change or addition to exhaust system but I need to confirm.
Electronics Forum | Mon Jul 12 05:54:34 EDT 2010 | xps
Hi everyone, someone knows the correct parameters for reflow the smt devices using SnPb on ENIG finishing ? Someone suggest to use more temperature than others finishing, cause nickel barrier. Someone can confirm this ? There are handbooks or articl
Electronics Forum | Thu Sep 02 02:48:01 EDT 2010 | sachu_70
Hi Resse, there seems to be some mistake in translating aa to mil. I thought, 1mm should have been about 40 mil. Pl. confirm. The larger the fid dia, lesser is the accuracy during recognition.
Electronics Forum | Thu Sep 02 08:32:18 EDT 2010 | rway
Yes, you are correct. I converted it (tryed to at least) by hand and did not carry by decimal place far enough in converting mm to mil. I double-checked my conversion and confirm 1mm = 40mil. Thanks for correcting me.
Electronics Forum | Fri Oct 29 06:48:21 EDT 2010 | marusha
Many thanks to dyoungquist and Say! You confirmed me in my opinion.
Electronics Forum | Tue Jan 04 14:06:58 EST 2011 | cyber_wolf
First I would confirm that both of your X-motors and transducers are working through the service menu. After that start looking at the big power booster on the back of the machine.
Electronics Forum | Tue Jan 04 15:11:57 EST 2011 | ev
The Xmotor tests just confirms that the hardware did not initialize.....unless I am looking at the wrong menu. I have external fans on the booster board and the X motor on the back of the machine as well as one blowing directly into the computer box
Electronics Forum | Thu Dec 29 06:23:25 EST 2011 | tringdoo
I tried to register several times but they (UIC) didn't send me confirmation link. Did anybody have this problem?
Electronics Forum | Wed Mar 14 03:52:48 EDT 2012 | haiae
I'm waiting for your confirm about spare parts for Contact 3xx machine Please advise. Thanks,
Electronics Forum | Mon Jul 30 20:38:02 EDT 2012 | davef
I'm with you on microcracking. The best way to confirm this is through sectioning of the affected capacitors. You're fortunate to be seeing these failures showing-up early in your product life. Of times these failures don't appear for years.